Question about LG M4410 Cellular Phone

2 Answers

Nokia K750i How is that achieved? Will it still be a software issue if the old screen still displays detail, even if it's only the bottom 20% of my screen, whilst the new screen doesn't even when I interchange them? In other words, old screen in phone - bottom 20% readable; new screen fitted - completely white; replace new screen with old screen - bottom 20% readable again!!!

Posted by Riazor Blue on

  • Riazor Blue Oct 23, 2008

    In the end it turned out to be the wrong screen I'd been sent. I needed a new screen with an orange -coloured connector. When one with the orange-coloured connector was fitted, the screen was fixed and I was able to view 100% of it as I had been able to before I'd dropped the phone.

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The Main display is displayed with pure white screen, some times it interchanged, but now it is clearly in pure white screen, give me solution

Posted on Oct 23, 2008

Ad

Anand Kumar

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

If the new screen is white and old screen displays 20% of the display then you can check by flashing the software , in most the cases white screen is the software problem.....

Posted on Aug 18, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha psr4000 no sound when i play keys


To start with try a master reset, whilst the instrument is off press and hold the top (highest) sounding key whilst turning on.
When the screen displays Yamaha release the top key.
If this doesn't solve the issue then it could be a number of things as the keyboard does a self check on startup and will hang if a fault is found. Check each rubber switch is not stuck down or even missing this can cause this issue. Please report back either way.

Dan
Becketts Music Ltd

May 18, 2017 | Yamaha Music

1 Answer

Yamaha psr-e333. Can switch on but cannot play even the grandpiano func. Its just "yamaha" written on the display..


To start with try a master reset, whilst the instrument is off press and hold the top (highest) sounding key whilst turning on.
When the screen displays Yamaha release the top key.
If this doesn't solve the issue then it could be a number of things as the keyboard does a self check on startup and will hang if a fault is found. Check each rubber switch is not stuck down or even missing this can cause this issue. Please report back either way.

Dan
Becketts Music Ltd

Apr 28, 2017 | Yamaha Music

1 Answer

Edius gold software


Whilst I accept that your English may be challenged I'm astounded that you can't even be bothered to describe the issue in detail but you expect free help. In any event there won't be many edius users on here anyway. Ask you question properly in the grass valley forums. If you ask it the same way in there that you did here you won't get a response. EDIUS Compatible Hardware and Accessories Grass Valley Forums

May 12, 2014 | Canopus Edius Video Editing Software for...

1 Answer

Laptop screen has a 1" wide white bar


Hello,

please try to call/contact Toshiba Tech Support to advice where to get the suitable Driver's Software, but check this link 1st,

http://support.toshiba.com/support/modelHome?freeText=1157633

this is a link for all support given by Toshiba for your laptop with the contact details so you can reach the Tech Support to help with the software issue.

- My Recommendation for you is to upgrade your System to Windows 7 which will help you also to avoid such an issue in the future as its auto Install Drivers even if its not available, it search for the software and install it for you as an update.

KR,
Nasr

Apr 08, 2014 | Toshiba Satellite M65-S809 Notebook

1 Answer

How do I achieve a Full screen? [email protected]


To display a full screen in a browser, one usually presses the F11 function key.

Sep 30, 2013 | Microsoft Windows 7 Professional Upgrade...

1 Answer

Hi - the screen on my dell d410 goes dark 20 seconds after powering on, regardless of whether I boot normally to Win (XP) or hit F2 to reach the BIOS. Note the screen display is just about visible if...


As per the problem description the Laptop Display is Fade out even in BIOS window. If that's the case then the unit must be serviced as the issue is Hard ware related. The Computer uses minimum Softwares in BIOS Mode, Hence most of the Diagnostics related to Displays and Input adn Output devices are done in BIOS. I suggest you get the unit serviced. For details of the Nearest Dell Authorized service Center please visit the following Link:

http://www.dell.com/content/topics/reftopic.aspx/dfo/topics/en/services/services_warranty?c=us&cs=22&l=en&s=dfh&~ck=mn

Dec 06, 2010 | Dell Latitude D410 Notebook

1 Answer

Sony Ericsson K750i


The flashing will effect the unlocking of the phone , if you were able to see 20% of the display ,I will suggest you get it check from local mobile service ,there may small problem may be fixed a less cost...

Aug 22, 2008 | Cell Phones

1 Answer

I just bought a Canon d750. When I went to install the software it told me that the screen resolution to execute digital camera disk is not suffcient. I'm running Windows XP, and there shouldn't be a...


The operating system is not relevent to the screen resolution. This can be set from very low to the maximum that the monitor and display card combination can handle.

If you cannot achieve the proper resolution on your computer, it is possible that the display card and monitor combination may be not up to date to work with the camera software.

You have to make sure that the screen resolution is set to the minimum setting as recomended by the manufacture.

You can find the settings in the screen settings properties. Refer to the installation instructions for details.


Jerry G.

Jul 12, 2008 | Canon Cameras

1 Answer

GPS not able to lock (SNR often 0, sometime in thee 5-10 range)


Me again...I took the unit apart and found out that there is a coax cable between the back board and the middle board. The cable has plug in connectors (v. small size) and the female connectors are soldered SMT on the boards. They are coming out quite easy..so one of them was literally ripped off the board. I soldered it with quite a fine iron,did a reset and I am back in business.....as a footnote my readings in AZ /El were all zeros!!!!

May 21, 2007 | Magellan RoadMate 700 GPS Receiver

Not finding what you are looking for?
LG M4410 Cellular Phone Logo

Related Topics:

889 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Cell Phones Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

William Norris
William Norris

Level 2 Expert

107 Answers

The Knight
The Knight

Level 3 Expert

76332 Answers

Are you a LG Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...