At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Try ebay or contact your local authorized Husqvarna Viking dealer. You can find a local dealer from the Husqvarna Viking website - http://www.husqvarnaviking.com/us/
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
A foot pedal for a Husqvarna Viking 1610 sewing machine can be obtained from several sources:
Sewing machine dealers: Many sewing machine dealers, especially those that specialize in Husqvarna Viking sewing machines, carry a wide range of replacement parts, including foot pedals.
Online retailers: Websites such as Amazon, Ebay, and SewingMachinesPlus carry a wide range of replacement parts for older and newer sewing machines, including foot pedals for the Husqvarna Viking 1610.
Husqvarna Viking: You can contact the manufacturer Husqvarna Viking to find the nearest authorized dealer or to purchase parts directly from the company.
Specialty stores: Some specialty stores that focus on sewing machine parts carry a wide range of replacement parts, including foot pedals for older and newer models of sewing machines.
FWIW, I was unable to find any information for turning off the thread portioning function. Unfortunately, this appears to be the thread tensioning system, so disabling the thread portioning would be disabling the thread tensioning--something that is critical to sewing. It appears this model may have some issues and perhaps this one is particular to your machine. It may be best to take it for service.
not knowing whether you have a Viking foot, I'm not sure how to advise you. Suggest you visit an authorized husqvarna viking dealer for assistance. They are usually eager to help.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com Good luck.
Mine does the exact same thing. I think the problem might lie in the cord to the foot pedal. The cord packs into the foot pedal for storage, which forces the cord to to remain bent during storage. I believe the wires in mind became damaged and broken so I took it apart and reconnected the wires at the spot where the connector meets with the wires. But I still don't leave it plugged in if I'm not using it, it could be a fire hazard.
If you still need assist, suggest you visit an authorized Husqvarna Viking dealer for assistance.
You can locate a dealer near you by visiting the husqvarna viking website and clicking on the Dealer link on the left-hand side of the page - http://www.husqvarnaviking.com Good luck.
×