Question about Philips Magnavox 20MT133S 20" TV

Open Question

I HAVE A PHILIPS MAGNAVOX 25B800-7562

I HAVE A SAYNO UNIVERSAL REMOTE AND WANT TO NO THE CODE FOR THE T.V ? HELP ME PLEAS

Posted by hudgins76 on

Ad

5 Related Answers

Anonymous

  • 132 Answers

SOURCE: Universal remote code for Magnavox MWD7006

4 digit code is 0458

Posted on Jul 16, 2008


VOTIT

LORETO LACARON

  • 2071 Answers

SOURCE: philips activation code for a remote control

http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or yourbrand is not listed, and you are still not able to get the unit to respond, trythe following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when youreach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing thefollowing steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keysor press and hold SETUP until the Cinema's red light flashes twice to lock inyour new feature. (If the red light does not blink twice, stop and repeat stepsthrough 6).
To test the new feature, press and release the device key in which the newfeature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions,please feel free to post them here.
Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): clip_image001.gifclip_image001.gifWe could not find an exact match, we think this code will work. 10054 clip_image001.gifclip_image001.gifSetup Instructions
· Set the "Mode Switch" to TV.
· Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
· Enter the 5 digit Code above.
· Try your new code and tell us how it worked!
You'll have to settle for that, use the middle power key in the tv device to power on & off the tv.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Aug 22, 2008

Ad

Anonymous

  • 13 Answers

SOURCE: Need to program a universal remote to work on Magnavox TB100MW9

Most of these are new and codes do not exist for them. You'll need a universal remote that has a learning feature so it will learn the code. Walmart has them for $16-$19.

Posted on Nov 22, 2008

mixelcores

mixelcores

  • 10 Answers

SOURCE: Remote Control Code for Magnavox mdv-430 dvd player

Yes, a Philips replacement remote should be an excellent choice for your Magnavox DVD player, since they are sister companies. I am using the inexpensive Philips URC US2-PH5DSS and it works well. Your Philips remote will come with a page with all manufacturer codes listed by the type of device. Or you can visit the Philips URC code lookup website at www.urc.philips.com.

The codes listed for Magnavox DVD players are:
0441, 0442, 0447, 0599, 0799, 0699, 0247, 0193, 0093, 0598 You'll have to try them one at a time to see which works best for your player's functions.

Posted on Jan 21, 2009

Anonymous

  • 2 Answers

SOURCE: Need the instructions and Code to Program universal remote control PHILIPS (Magnavox) and Magnavox TV.

SETTING CODES
HOLD THE CODE SEARCH BUTTON DOWN UNTIL THE RED LIGHT STAYS LIT.

PRESS THE DEVICE BUTTON (ie TV)

CHANNEL UP BUTTON UNTIL THE CHANNEL CHANGES. (300 SHOULD BE MAXIMUM)

PRESS THE MUTE BUTTON TO SET THE CODE

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need help with rca converter box with Motorola universal remote. Pleas help


Use the code search feature of your Motorola remote to find something that will work with your RCA STB. If a search through all codes stored in the remote fails, you may have to try a different universal remote (RCA would be a good choice).

May 30, 2016 | RCA Televison & Video

1 Answer

Sayno DS31650


I am giving you the universal remote programming codes click the link below
http://www.thompsontv.com/rcarc.html
Check it out!

Oct 14, 2007 | RCA F25648 25" TV

2 Answers

I need code for philip s remote for a sayno ty


Philips rca universal remote codes sayno vcr dvd combo ...

www.fixya.com > ... > Remote Controls
Universal Philips Magnavox remote for a Sanyodvd vcr combo ? I have a cableremote and need to program my Magnavox vcr/dvd combo into it i have 2 dvds ...

How to Reprogram a Philips Universal Remote Controller ...

science.opposingviews.com > Computers

Dec 21, 2015 | Philips Televison & Video

1 Answer

I haves ge rc24912-e 2816 universal remote that I am trying to program to a Philips DVD player dvp3962 I don't have the Manuela anymore and I have been at this for two days can you help me pleas


If you have a GE universal remote, use its code search feature to find one that will control some or all of your Philips DVD player functions. If a suitable code cannot be found, your GE universal remote may not have a code in its library.

Jun 08, 2014 | Televison & Video

1 Answer

How would i find the code for a universal remote for a sayno


You can try these, they are for sanyo, 017,023,027,038,066,080,091,098,123,125,126,202,203,205,206,207,208,209,210,211. ..hope this helps..

Mar 18, 2010 | Sanyo DS19310 19" TV

1 Answer

I have a remote rca and i need the code to match a sayno tv. can you help


As i`ve not got much info on your tv,so click on the below,go down the page to sanyo and take it from there.

http://www.remotecodelist.com/remotes/

Hope i`ve helped.!

Dec 01, 2009 | RCA Universal Remote Control

1 Answer

Need codes for Sanyo for my radio shack Universal Remote


I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating as thats how we get paid.

May 13, 2009 | Sanyo Televison & Video

1 Answer

Codes for remote


hi can you tell me your model number of your remote controle

Dec 09, 2008 | Philips Magnavox Learning Universal Remote

1 Answer

Remote


Try here at the RCA site and please rate me if this helps.

http://remotefinder.rca.com/default.aspx?site=rca

Mar 26, 2008 | RCA Universal Remote Control

Not finding what you are looking for?
Philips Magnavox 20MT133S 20" TV Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...