Where is the menu button to get rid of CSD Lochout

The menu should tell you to press 1 (or 2) to get rid of it. The (1) and (2) refer to the first two buttons on the bottom right side of the monitor.

You might try this:

press menu
press down arrow button (until you see System Setup)
press menu to highlight 'splendor demo mode'
press menu again and you see On/Off
press down arrow until OFF is highlighted
then press the try me button (leftmost) twice to turn off menu


Please let me know if this works for you.

replaace 5v regulator for processor

Try turning the monitor off, holding the + and - buttons for brightness and contrast and turn the monitor back on release the buttons.

Next if that dosent work hold the menu button down until the osd unlocked pop up appears.

hope this helps.

for you to get rid the message internal memory is full, first you need to press menu button then look for setup menu and then under setup menu look for the word format then press ok, now it will provide to options format internal memory or the memory card, now highlight the internal memory then press ok button., Gudluck!

Tanya,

call the customer service of Mobily and ask them to send the Internet access settings through SMS.

They'll send the setup settings and you have to just save it.

After that you can use browser to connect to internet

THE SWITCH BEHIND THE MENU BUTTON ON THE TV IS MOST LIKLY DOING YOU IN

SOUNDS LIKE U HAVE CLOSED-CAPTION TURNED ON. HIT MENU, GO TO RIGHT TO C.C.( CLOSED CAPTION) AND SELECT OFF, HIT EXIT BUTTON. GOOD LUCK

see if this corrects the problem. . .press and hold menu/voice mail button to enter the menu. . .press the zero/oper button to go to the message waiting programming option. . then press the edit/flash button to reset tne Message Waiting Indicator. . "DEL" will begin flashing..press the redial/save/ pause button to delete this indicator.. . a long beep will sound to confirm a reset/removal of notification..press menu button to exit. Theo

try bringing up the menu, and see if there's an option "factory default", and try that. you didn't mention what button on the remote you press to get rid of the popup, or what feature you are turning off to get rid of the popup,