I have a canon power Shot A560 camara digital, but I need the software disc because I Lost and i can to put it in my computer So I need to know is posible you can sent this software at my email this is [email protected]

You don't need to install your camera in order to use it.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

You can download Canon software from
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a560#DriversAndSoftware

You might want to consider NOT connecting the camera to the computer.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive. Or you can use any photo cataloging program.

You can download manual, drivers, other software from this page.

it should ,if you go in the menu set up and date and time section you must be able to do it

hope that will help you
regards allan

You should be able to find the software here. Canon A560 Powershot Downloads
Just choose your operating system, find the software you need, and download.

Press "Func Set". Scroll up or down to "Drive Mode". Scroll to the right to the icon showing "10" for 10 seconds (the other is 2 seconds). Press "Func Set again. Put the camera on a table or chair. Press the shutter, and get in the picture!!!

Go to:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=14904
and select what you need from the Guides & Manuals box.

Go to:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=14904
and select what you need from the Guides & Manuals box.

You can download the Basic and Advanced User Guides from the manufacturer's web site at http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=320&modelid=14904

download from canon's web site or just usb camera to computer and computer will auto recoginize camera turn on and put in playbck mode