The television stays in closed caption mode regardless of the settings. Is there a way to reset it to factory default

Do a reset to this TV set and check. To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

The text mode in the closed caption is turned on... default all settings to factory settings from remote. your good to go,

Hello

There is only one way, and that is to unlock the closed caption feature by entering the code. By entering the code you have set to lock closed caption you can set it off. If you have forgotten the password you have entered, do the folloing ot unlock your TV, and then reset all the features later.

if you ever forget your

code, the 0, 7, 1, 1 code is the factory

default and can be used to

enter and create a new access
code.

After unlocking the code you have to reset all the settings again if you wants.
OK.

Go into the tv menu again,Go to"Display Options"closed captioning u pick captioning bigger for as a default,but did u push the button on the remote said Enter?Press the enter button for the defualt caption will see the left side of the tv captioning default u want.Now the if u,used the CC button.U will get the bigger bold matalic captioning u want.

go through the menu until you find a section called restore defaults, factory default setting, something along those lines. reset that and you will be good to go!

Leave it off unplugged from the mains overnight. This should reset the TV to factory settings removing the closed caption problem.

If this fails you should be able to find factory reset in the set up menu.

Good luck!

This is a box for text, such as closed captioning or demonstration mode. Go into your setup menu and turn off closed captioning or return to factory settings.

I experienced the same problem for about an hour before recognizing that the "continuous on" closed captioning had been activated on my cable box, not the TV. The signal feeds through despite the CC settings on the TV. If you haven't already, try checking the CC settings on whatever device is supplying your video.

Black box by itself coud be a software issue call toshiba tec support or could be in some stuck in a service mode for the factory regardless you will need to call tech support

I have the JVC I Art 46" TV. The Close Caption was turn on accidentally by my grandson. After lots of searching for the original remote. I called JVC Customer Support. He told me to change the Close Caption settings to CC2 and T1. That fixed the CC without having the original remote.