Instalation program - Lexmark X2330 Printer

what problem are your experiencing?and what software are you trying to install?Please specify the problem and software so we can give you the solution//

Important Notes

Computer softwares are the programs that would be integrated ino the computer by a process called installation. Available installation softwares include productivity, multimedia, creativitiy and gaming programs. Computers already have programs installed to perform also known as operating systems softwares. When a computer is turned on, the display systems making possible user experince is the defaul programs. Every additional features is capable of being intergreted in processes discribed. A required program whether in video editing is chosen after observing the already existing programs on the computer. The decsion to integrate an additional software is with consideration of an entire computer compartibilily check.

Computer situations requiring installation
1. The computer default programs are malfunct
a. outdated computer programs request integration improved features to function
b. a damage to the computer default programs requires repairs by installing.
2. The option to integrate a program to a computer device
a. several programs are capable of being integrated


Procedures of -installing softwares

component check requirements check
1. computer compartibility to software programs selections required to be installed
a. A computer capacity to hold additional softwares
b. a computer functionalities, productivity, video multimedia creation, computer gaming
c. the programs functions could determine if additonal component parts have to be acquired to complete the integration experiece

contact technical support

that no problem, why your program install at x86 is because uour program installer is for 32 bit, and your win 7 is 64 bit, if your program installer is for 64 bit it must installed ad program file folder. i think this no problem, your pc still work properly
please rate my answer
i hope this helpfull

How to install a software program can depend on the operating system being used and the program being installed. Because of all the different possibilities, we have created the below steps as guidelines for installing programs in each of the major operating systems.
Notice: This document has been created as a basic overview on how to install software programs, games, and utilities on your computer. If errors are encountered during the installation, this document will not cover those errors.
General Tips
Microsoft Windows 95, 98, NT, ME, 2000, and XP users
MS-DOS Users
General Tips

• Make sure your computer meets the requirements of the program, game, or utility you are attempting to install.
• The manuals for the program or the readme file located in the same directory as the install commonly contain exact instructions on how to install a program.
• After installing or during the installation, a program may need to install other programs, files, or utilities before it is able to run. If this is the case, the program will commonly prompt you to install the program or you may need to run a separate install before the program can be fully used.
• When installing a program, utility, or game, it is always a good idea first to close or disable any other programs that are running.
• After installing a new program if it prompts you to reboot the computer, do it.

Microsoft Windows 95, 98, NT, ME, 2000, and XP users Many software programs, games, and utilities have an AutoPlay feature that will automatically start the setup screen for the software program when the CD is placed in the computer. If your program, game, or utility contains this feature, run the installation through the screen that appears after inserting the disc.
If you are installing a program, game, or utility that does not contain this feature or you are installing a program from a floppy diskette, follow the below steps.

1. Open My Computer.
2. Within the My Computer window, open the drive that contains the installation files. For example, if the files are on a floppy diskette, open the A: drive. If they're on a CD or DVD open the D: drive or the letter of the disc drive.
3. Within the drive that contains your files, locate either a setup or install file. Double-clicking on this file should start the installation for the program, game, or utility. If you see multiple setups or install files, try to locate the Application file or double-click each of setup or install files until you find the file that starts the installation. Many times the icons associated with the installation files have the same name.

An alternate method of starting the installation in Microsoft Windows

1. Click Start and Run.
2. In the Run Window, type x:\setup or x:\install where x is the letter of the drive you wish to start the installation from. For example, if you are attempting to install a program from the floppy disk drive you would type a:\setup or a:\install.

MS-DOS Users Users installing a program from Microsoft DOS should have a basic understanding of the MS-DOS commands. If you are unfamiliar with any of the commands listed below, click the link to get additional information and examples on the commands.

1. Before installing a program in MS-DOS, you must switch to the drive and/or directory that contains the installation files. If you are installing a program from a CD or diskette, switch to that drive. Additional information about switching drives in Microsoft DOS can be found on document CH000515. If the installation files are located in a different directory, use the dir command to list the directories and the cd command to switch into the appropriate directory.
2. Once you are in the directory or drive that contains the installation files, run the executable for the setup. Many times this can be done by typing setup or install at the prompt to start the installation. If both of these commands give a bad command or file name error message, type dir *.exe or dir *.com or dir *.bat. These commands will list any executable files; if any files are listed, attempt to execute these files to run the installation or setup of the program. If no files are listed when typing all three of the above commands, it is possible that either you are in the incorrect directory or drive letter, or that the program.

Additional information about running an file from MS-DOS can also be found on document CH000598.
Additional information:

• Information about problems that can occur after an install can be found on document CH000123.
• See document CH000506 for information about how to extract a file that you've downloaded before installing a program.
  
  

< Please Rate :) >

Try using the 'Windows Installer CleanUp Utility'. This utility helps resolve installation problems for programs that use Microsoft Windows Installer. If you use this utility, you may have to reinstall other programs. Caution is advised.

Use the following link: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

You must be logged on to Windows with a user account that is a computer administrator to run Windows Installer CleanUp Utility.

When you use Windows Installer CleanUp Utility, you can perform the following functions:

• Select one or more programs that were installed by Windows Installer from the Windows Installer CleanUp dialog box.
  
  To do this, select the programs that you want in the Installed Products list in the Windows Installer CleanUp dialog box. After you make this selection, the utility removes only Windows Installer configuration information that is related to those programs.
  
  
• Remove all Windows Installer information associated with the selected programs. This includes the entries for the programs in the Add Or Remove Programs item in Control Panel. Be aware that only the Installer information for that particular program is removed, not the files.

If you use this utility to remove Windows Installer configuration information for your program and you plan to reinstall the program, you should reinstall the program in the same folder where you originally installed it. This prevents duplication of files on your hard disk or disks.

on starting the computer press ctrl+alt+delete
It gives the list of processes running. End process the applications which run from program files. Make sure you dont end process system applications

An Online manual in PDF (Portable Document Format) was installed along with your software. If you already have Adobe Acrobat Reader 3.0 or higher on your computer, your manual is ready to read and print immediately after you install the program:

1. Click Start
2. Select Programs (or All Programs)
3. Select the name of the program you just installed (you may have to Select Cosmi, then Select the program name)
4. From your program's sub-menu, you should see Manual or PDF Manual.

If Acrobat Reader is not already installed on your computer, you may download the latest reader from Adobe or follow the instructions below to install the version that came with your program:

1. Click Start
2. Select Programs (or All Programs)
3. Select the name of the program you just installed (you may have to Select Cosmi, then Select the program name)
4. From your program's sub-menu, Click on the Read Me file.
5. Follow the instructions that are provided to you from the Read Me file on how to install the Adobe Acrobat Reader from your CD.

there is an option called programs and features ...
and if u want to install a program install it in a normal way

Need to reload software in pc. Dropping stuff. If you found this helpful, please post as so. If you need to knwo how, live chat