I have a Blaupunkt Milano MP34 car CD Radio. I am having great problems tuning the radio into stations. Each time I try to tune in all I can get it to do is scan and it never seems to pick up any radio station, even when the few that I have are giving a very strong signal. Is there any way that I can disable the scan function and manually tune to the frequencies that I want? Many thanks.

SOURCE: No sound from Blaupunkt Monterey SQR 23

yes , there is an internal amp that will need to be replaced , but will also need to be tested for any other components on the amp that may have caused it to fail , unless you were just cranking it up, then the amp just burnt out and will need replacement

SOURCE: setting radio stations on clarion auto dbr2475 w magi-tune

try this on most units search the station that you want to save and when its on it press and hold the numbered buttons till it says on the display saved or you hear a tone

SOURCE: car stereo displays 000ZAA

000ZAA:
remove front panel and press reset button with ballpen

SOURCE: stock radio won't tune into an FM radio station.

check you attenna connection otherwise it has lost it's ability to seek and stop

SOURCE: Hi I've got a Kenwood KDC 2020 car radio. How do I

oh this easy i couldnt figure it out for a while but ill teach u.
first you pik a station by searching and den when you have found the one you want all u do hold the numbe u want thestation on.
example: 104.1 on number 1, 96.9 on number 2