Ich habe die CD von CAMEDIA Master 4.1 geladen aber mein PC erkennt die Camera nicht.

SOURCE: I am trying to install the Camedia Master software into a new pc, but when the disk gets to 90% loaded it freezes.

A CRC error (Cyclic Redundancy Check) is a data corruption error. This basically means that the data read from the media did not match what was expected to be read by the software. I would say that it is most likely that the source media that you are copying/reading from is corrupted. It is also possible that the destination media that you are copying to could be the source of the problem. If it is a hard drive try running scan disk or other disk repair software, if it is a CD - clean or replace the CD. David Millier Advance Camera Repair

Posted on Feb 25, 2007

Damen Wong

• 1950 Answers

SOURCE: lost cd software for camera

Hi,

You can download and use Olympus Master 2 from Olympus.

http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp

Posted on Feb 24, 2008

SOURCE: camedia master C-150

i have the same problem

Posted on Jan 08, 2009

SOURCE: i hve lost the serial no. of camedia c-350 zoom d-560 zoom x-250

To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp Click on 'Free Download' to register your email address to receive an email containing a link to download either the Windows or Mac version. This software replaces all previous versions of Camedia Master 4.x and Olympus Master 1.x and is XP and Vista compatible.

Posted on Jan 09, 2009

SOURCE: have loaded camedia master 4.2 on to PC with

Time to start using a card reader.

Posted on Mar 13, 2010