Question about Computers & Internet

2 Answers

For monitor display setting

Sir good after noon ,
i m paresh from india 
i have hcl desktop pc 
my pc's warranty is avoided and 
i have a problem in monitor that
in monsoon my monitor's  image setup menu were autometically running so i replace menu push button and it is ok but during this period in service manual was changed 
my monitor's vertical center is changed from service manual and 
image stairs up 4 inch in monitor 
my 17inch  monitor model no is " hcm782m " and in our city no body can repair it and 
they tired from it 
my monitor's main ic name and no is novatek nt68f65ug, 0607-gm mlymg
in circuit there is no problem detected. 
so sir please teach me how can i open service manual because image setup menu's vertical position is 100 and no change in only it. other menu is proper working. please sir give me solution 
                                                                      yours faithfully 
                                                                         paresh

Posted by Anonymous on

  • Anonymous Oct 05, 2008

    same Problem

×

Ad

2 Answers

Anonymous

Good .thank you .my monitor is normal.

Posted on Oct 10, 2008

Ad

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 65 Answers

Good evening Paresh this is viswanath Don't worry I can salove UR problem
First U go to Open Menu & go to Zoom option, select Zoom Function and press 30 sec
sercice manual is open Adjest UR settings & save it,turn of ur monitor.

Posted on Oct 07, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have HCL Ezeebee desktop computer when we boot the system monitor, keyboard, mouse blink for a while and monitor (HCL) show 'no signal' message, and keyboard num lock led not display mouse i


No signal at the monitor indicates (if you know the monitor is working ok) a failure of the graphics chip or graphics card, The lack of indicator light on the num lock LED and the lack of power to the mouse would indicate that there is a major issue with the motherboard.
you can try using another monitor to confirm the problem lies with the graphics, and in the case of the keyboard and mouse, swap them for a usb version, if they work, the Ps2 ports are probably damaged.
I'd be thinking of replacing the motherboard

May 19, 2012 | Computers & Internet

2 Answers

SIR, MY LAPTOP IS NOT WORKING PROPERLY...IT IS ACER ...AND THE KEY BOARD IS NOT WORKING PROPERLY..WHERE IS THE GOOD SERVICE CENTRE TO REPAIR THIS...IAM STAYING AT MAVELIKKARA KERALA...WHERE IS THE NEARBY...


Try the ACER support center in Bangladesh for warranty work
Bangalore - India
Acer Customer Service Center
C/O Compherals
2A Alsa Glendridge
32 Langfort Road
Banglaore – 560025, India
Tel: 1-800-11-6677
Fax: 91-80-22296068

cheers

Aug 28, 2010 | Acer Computers & Internet

1 Answer

Fedora not working gui mode


The  x-server doesn't start. Try to start it thru command mode using the startx command. The cause for this is usually a bad xorg.conf file - the file that holds the configuration of the x-server. Just delete it thru command and a new one will be generated.

Jun 04, 2010 | AcerPower Sn PC Desktop

2 Answers

I have a hcl crt monitor,it always starts auto


hcl monitor fungtion key autometic play

Dec 13, 2009 | Computers & Internet

1 Answer

The system fan is missing or is not working your system has been halted in order to avoid any damag


good day sir hi, check to see if the power supply, and processor fan is working properly, does it blow hot air. Check your processor fan, make sure that the fan is connected to the proper power port. There are two types of port, the 3 terminal port, without fan temperature monitor and the 4 terminal port with temperature monitor, check if your processor fan is compatible with the 4 terminal port.
You can also disable the temperature fan thing that monitors your system fan, just go to the BIOS setup, find the hardware monitor and set you fan to disable monitor. Hope this helps.

Nov 17, 2009 | HP Vectra Xe320 PC Desktop

1 Answer

We have a computer HCL branded, but motherboard driver CD misplaced. mother board number is GTM I 845GVAL


dear,
where are you located in india.. i have a good network in Chennai (India) to get your driver cd just call:+91-044-24340823 (PIXESLS SYTEM) located at Tnagar Bus stand, opposite & Aruna Lodge next street.
(Gopal Street.)
thanks

Jun 16, 2009 | Computers & Internet

4 Answers

HCL HCM780M CIRCUIT DIAGRAM


SIR..., regarding monitor...display block characteristics which is operated manually by buttons situated bottom of monitor is anytime coming at the centre of monitor display... The settings block comes on suddenly and we are unable to exit from the same sometimes the block goes off without any action and everything is fine till it is back again and it is come again and again.....by all this i did'nt work on my PC...all result it's useles......please sir giving your suggestion as soon as possible....... This has been happening for the last 1 year and is a real pain Please send some solution

Jan 23, 2009 | Computers & Internet

3 Answers

DRIVER


I NEEDHCL H505,MODEL NO.4126 HCL DRIVER. PLZ HELP ME AS EARLY AS POSSIBLE

Dec 07, 2007 | Enteractive Simply Interest (708828490033)

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...