The F61 error message is effectively a "protect mode" message indicating that a problem was detected and that the system hasbeen shut down to prevent further damage. This is typically caused by a bad output amplifier pac or regulator. If you can post the specific model number, I'll try to get you the part numbers and costs.
Dan
477 views
Usually answered in minutes!
Panasonic CD Stereo System - Model is SA-CH94M.
The F61 message is displayed, followed by a 'Good Bye' message.
It did this four or five times when turning the system on. Now the system is dead!
Any clue?
Mine is a Panasonic Home Theatre SA-HT995. When i switch it on the message is either "RESET" or "F61" then it goes dead
same problem display f 16 and wont turn on SA- DT100
×