At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ok sir you have defective power supply at hot side section! and the
power oscillstion circuit! your unit need to diagnos to know the exact
defective parts!
It is for put the set to standby. If you press it, the set will stop working, but it will be still alive. When you press Power button on the remote control, the set will come alive. OK?
Same issue with - Panasonic TH-50PX70A , power UP with red standby, then power ON by remote - only Gives GREEN led blinking 35-40 times, followed by solid green led with no no picture no sound.
>> Solution; unplug Plasma from AC 10-15min, then plug in & power on to Red standby led,, At this point - Power ON tv while holding down both -Volume Down and F (function Select) buttons (front panel door) at the same time turns picture ON,all ok.
It occurs when your wii in the Standby, but WiiConnect24 is enabled with Standby Connection is enabled. the content
can also be received when the Wii is left in standby mode.
WiiConnect24 can be turned on or off via the setup setting. While the console is in standby, the power LED indicates the current
status of the standby connection,
Red indicating Standby - wiiConnect is
off,
Yellow indicating Standby - Connect mode is on. If you hold the power button for 3-4 seconds, the
Wii goes into standby mode with Standby Connect off. and WiiConnect24 will not operate until
the console is turned on.
the high voltage or flyback transformer is not working.the sound runs off a separate fixed power supply.if you run your hand across the screen,is there static?that would mean the high voltage is ok but there is another circuit fault
×