Question about Paradyne 6381 ADSL2+/ReachDSL Router (6381A3200)

Open Question

Paradyne 6381-A3-200 ADSL2+/R/Bridge/Router very slow

I have a 6381-A3-200 ADSL2+/R/Bridge/Router that is running very slow and not all the lights are flashing. The Power and Status lights are solid, the activity light has nothing, the LAN light is about half flashing and the USB also has nothing. Used to be fast up until a few weeks ago. Took to internet carrier and they said it was fine. Had my line checked on outside of house and it was fine as well. Only use my computer for research and surfing and rarely download anything. Have unplugged and rebooted. What do you think?

Posted by joebobwire on

Ad

3 Related Answers

Anonymous

SOURCE: 6381-A3-302,6211-I1-300 Paradyne ADSL 2+/Bridge Router

Admin/Admin default id and password

Posted on Mar 06, 2008


Anonymous

  • 1 Answer

SOURCE: 6381-A3-302,6211-I1-300 Paradyne ADSL 2+/Bridge Router

i have paradyne paradyne 6381 a3 302 lost the driver cd. My new windows xp don't pick it automaticly. plz give me a slution.

Posted on Aug 16, 2008

Ad

Anonymous

  • 10406 Answers

SOURCE: network extender

You don't -- the strength of the transmitter inside the unit is what limits the signal-strength out at 300 meters.

Instead, you need a "repeater" -- some people have built their own, using a Linksys router, and then reprogramming it with the free 'DD-WRT' software, and configuring the device as a repeater, rather than as an Access Point.

Posted on Aug 23, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My company provided me wired internet using Paradyne 6381 wired modem. it works fine. I have D Link 2640 T wirelss modem + router available with me. Please advise me how do I connect available D link 2640...


Since your D-Link 2640 is a modem + router it may not work the way you intend.

You need just a wireless router without modem.

Run a small Ethernet patch cable from your Paradyne modem into the WAN port on your router, you can plug your existing Ethernet cable into one of the other LAN ports on the router, then access the router setup using the computer connected to the Ethernet cable using a browser and putting the router's IP address into the address line of your browser. It will most likely be 192.168.0.1 or 192.168.1.1.

Once you have configured the Wi-Fi router you will have your wireless network. Full instructions should come with the router.

Routers are available for as little as $29.95 but expect to pay closer to $79.95 for satisfactory speed and capability.

Oct 23, 2017 | Paradyne ADSL/R 6381 Router (6381-a2-200)

1 Answer

What is the ip address of paradyne 6381 a3 300 router


To configure your router, open your web browser. Type the default IP address (http://192.168.1.1) into the Location field of your browser and press the Enter key. A Login screen will appear. Use the below to log into your router.

The default IP address is 192.168.1.1
The default user name is Admin
The default password is Admin

Both are case-sensitive.

Jan 08, 2010 | Paradyne ADSL/R 6381 Router (6381-a2-200)

1 Answer

How to configure my paradyne 6381 router


Go under LAN setup and enable NAT and Firewall services. Then go to LAN configuration to enable the dhcp server. Set the Start IP range and ending address.

Feb 24, 2009 | Paradyne 6381 ADSL2+/ReachDSL Router...

1 Answer

Using both USB and Ethernet to connect to the internet


Does your router suports usb ports, normally routers do not support usb ports, please check if your router first suports usb ports

Jul 22, 2008 | Paradyne 6381 ADSL2+/ReachDSL Router...

1 Answer

Using both USB and Ethernet port to connect to the Internet


Hi; I have used it with both ethernet and usb connections at the same time. I have never used the bridge, but I use it at home.

Try this ( I have XP SP3): Right-click on the monitors where the clock is (lower right corner), select "Open Network Connections". Go to the LAN connection and r-click "Properties". On the "general" tab select "Internet Protocol (TCP/IP)". There you select "Obtain IP address automatically" and "Obtain DNS server automatically" then click "Ok" until exit. Either Shut Down or Restart the PC. Check if this work.

Jul 19, 2008 | Paradyne 6381 ADSL2+/ReachDSL Router...

2 Answers

Trying to set up pptp on a Paradyne 6381


I have modems 6381-A2-200, sw ver.03.00.10. This model does not support pptp-connection.

Dec 06, 2007 | Paradyne 6381 ADSL2+/ReachDSL Router...

9 Answers

6381-A3-302,6211-I1-300 Paradyne ADSL 2+/Bridge Router


i have paradyne paradyne 6381 a3 302 lost the driver cd. My new windows xp don't pick it automaticly. plz give me a slution.

Nov 22, 2007 | Paradyne 6381 ADSL2+/ReachDSL Router...

1 Answer

Network extender


You don't -- the strength of the transmitter inside the unit is what limits the signal-strength out at 300 meters.

Instead, you need a "repeater" -- some people have built their own, using a Linksys router, and then reprogramming it with the free 'DD-WRT' software, and configuring the device as a repeater, rather than as an Access Point.

Nov 08, 2007 | Paradyne (6211-A2-200) Router

Not finding what you are looking for?
Paradyne 6381 ADSL2+/ReachDSL Router (6381A3200) Logo

Related Topics:

419 views

Ask a Question

Usually answered in minutes!

Top Paradyne Computers & Internet Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Cindy Wells

Level 3 Expert

6258 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you a Paradyne Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...