LRFC22750TT French Door/Bottom Freezer ER/FF Error
I have read everthing everyone had to say and decided to try taking of the back. Got as far and bottom portion and couldn't figure out how to take the rest of the back off. The fan at the bottom is covered with dust but doesn't seem to be hitting anything and I am not seeing any ice or water anywhere. How do I get the rest of the back off the frig?
Re: LRFC22750TT French Door/Bottom Freezer ER/FF Error
The ff error code means freezer failure.you need to replace the defrost control assembly in the freezer compartment behind the back panel..and the evaporator fan may be out also..mark at [email protected] or 503-406-7179
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I know how much everyone loves those reels They are great when they are new. But the truth is They are made to sell and they do sell. But I will bet a dollar to a donut that You would have 300% less trouble out of a Shakespeare Reel with less trouble and 70% less on cost and you cant wear them out.
My new D5100 also started doing the same thing to me the other day. I tried three different lenses, two batteries, and three memory cards. Everything still black. I had to send it back to Nikon for it to be looked at under warranty, but am not expecting much help based on all the horrible things I've been reading now about Nikon's terrible customer service. (The people on the phone at customer service have been completely unhelpful and couldn't care less so far.)
This is my first Nikon and to have it quit working brand new after 8 weeks is unacceptable. Plus I don't think I should have to pay to ship back a defective product under warranty. They should cover shipping as well free of charge. Now I see why everyone in my class owns a Canon. I hear their customer service is great. Wish I'd known sooner.
According to Canon, Error code 02 means that "There is a problem with the CF card. Try any of the following: Remove and re-insert the CF card. Format the CF card, use a different CF card."
Are both CF cards the same brand? Sometimes some brands have conflicts with the camera, you might try using two different brands.
It may not be the card, did you try on the third attempt to remove the battery and put it back in? There may be a problem with the contact points where the CF card plugs into the camera, or in the transfer system itself.