At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2000 toyota camry with a audiovox remote start installed by toyota lately the alarm will not engage or disengage i can autostart the car and sometimes the alarm wont disengage to enter the car i changed battery in remote and still same problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
no fuse for alarm ---and check and test key and ignition cylinder -key and or ignition needs to be flashed to vehicle start with that ---if you dont know what your doing have a repair shop take over [ trying to search for fuse or bypass a security system can lead to more problems and $$$$] and vehicle still wont start
First put a booster pack or hook your booter cable on the car and there powerto the voyager take your remote and unlock the car if you dont have a remote simply unlock the rear door and passager door should remove the alarm good luck thans on using fixya
The Alarm module is getting indicated.Inspect all the doors.Inspect the ignition and see if any other light is remaining on. Try reset by disconnecting battery negative for 5 minutes then reconnecting
if thats the picture of the transmitter to program it you have to : turn the ignition to on position. press and release the programming switch 3 times... press and hold,for 3 seconds, the buttonof the transu wish to add until the parking lights flash. this would mean the transmitter has been learned. repeat step 3 for each transmitter... turn the ignition off to exit the program mode..
do not let 15 seconds pass between steps.
sounds like some sort of aftermarket alarm or anti theft. from the factory there is no such button. do you have an aftermarket remote for an alarm or autostarter? if so, i would try locking / unlocking with it, or remote starting if so equipped.
what model is the audiovox alarm system? If the alarm is not remote start ready, then you will need to install another alarm system or a stand-alone remote start system.
×