Nids the link for login product page: dir 300 version 1.0 tenks...

How to recover my login Facebook password

Please reset your router once again correctly and reply to me.
See how to reset your router in this PDF file, page 62.

http://www.dlink.com/-/media/Consumer_Products/DIR/DIR%20615/manual/DIR_615_Manual_RevA_v1_US.pdf

The new firmware is available with instructions at Dlink's Website.
http://www.dlink.com/us/en/support/product/dir-615-wireless-n-300-router



This is the english address for the support on your model of router.

Typically the manufacture of the router you have will have the downloads on their website. Check out this site I have for you.

http://www.dlink.com.au/tech/Download/download.aspx?product=DIR-300

I am not sure what you need exactly but the following is a link for the D-Link Dir 300 Manual and you should be able to find answers to most questions in relation to this model

ftp://ftp.dlink.co.uk/dir_products/dir-300/dir-300_manual_v1.01_rev_A1.pdf

on a side note the adress to access most routers is 192.168.1.1. Hope it helps

www.dlink.com.au/tech/download.aspx?product=dir-300

 

you will find it here.Hope that helps

remote reboot:
1) login into router
2) http://$address/sys_cfg_valid.xgi?&exeshell=submit%20REBOOT
where $address is IP address:port of your router

You can find the software on the product page under "downloads"

You need to access the Setup page of Dlink DIR 300 wireless router:
1. Use a working computer that is hard wired to the router.
2. Open a Web Browser (IE, Firefox etc.) on the computer.
3. In the address bar of the browser type http://192.168.0.1 and press Enter.
4. When the login window appears, set the user name to admin and leave the password box empty. Click OK to continue.
(Note: If you setup your own Usename and Password on your router please use those info to login instead of using the default)
You will then see the Setup page of the router.
5. CLick on the ADVANCED tab.
6. On the left side of the screen Click on Parental Control.
7. On the "Configure Parental Control below: " select the option "Turn Parental Control ON and DENY computers access to ONLY these sites".
8. ON the "Website URL" tyoe in the website that you want to block
9. Click on the Save settings button.

Once completed then the sites you entered are completely denied and blocked on your router.

192.168.0.1
default login is
username admin
password leave blank