A faster solution is to plug in the charger for a second and that will reset the led.
I had the same problem. (Eventually) I 'un-paired' the headphones from my Mac; left them for an hour - until they went off automatically; then paired them again. It seems to have done the trick.
Headphone is easy to pair to most Smart Phones and Bluetooth-enabled Tablet.You can wear the earphone while you're running or working out, and do not have to stick your iPhone in pocket.make you enjoy the exercise. Amazon com Bluetooth Headphone Charm sonic Wireless Headphone for Gym...
Had the same problem. Plugging it into power did the trick for me. I like these headphones but they have a LOT of problems with bluetooth.
Bluetooth Headset
Pairing Instructions
1. When you turn on your Samsung Bluetooth
headset for the first time, it proceeds into pairing
mode immediately.
2. If you have paired the headset with other
Bluetooth devices, make sure that the headset
is off. Press and hold the Multi-Function button
until the blue indicator light stays solid blue after
blinking.
3. Set your Bluetooth phone to discover the headset
by following your phone's guide. Typically, the
steps involve going to a 'Setting', 'Connection',
or 'Bluetooth' menu on your phone and then
selecting the option to discover Bluetooth devices.
4. Your phone will find the Samsung headset and
ask if you want to pair with it. Confirm this by
pressing the Yes or OK key.
5. Enter a passkey or PIN, 0000 (4 zeros), then
press the Yes or OK key.
6. If pairing was successful, the indicator light will
flash in blue 10 times rapidly before going to
flashing every 3 seconds. If unsuccessful, the
light remains on, and you will need to re-attempt
pairing.
7. When you turn on your headset after pairing
with the phone, the headset is automatically
connected to the phone.
8. When you turn on your phone after pairing with
the headset, the phone is connected to the
headset by pressing the Multi-Function button.
2,939 views
Usually answered in minutes!
×