- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If that doesn't fix it you might have some viruses and malware.
Start
your PC and press F8 several times until the boot menu comes up. Then
select "Safe Mode with Networking". Now get some or ALL of the FREE
programs below.
Hi. Firstly, I would not recommend trying to fix this yourself, as doing so would void your remote's warranty. The screen on my Harmony 1100 went blank once, and updating the firmware fixed it. Sometimes corruptions can occur on the remote that cause this issue.
To update the firmware on your remote, log in to the Harmony software and click "Downloads" at the top of the screen. Then, click "Firmware," and follow the instructions to update the firmware and configuration.
:)
I think its better you check your re-installed updates,games etc......Try removing some unwanted files and increase the disk space.....also this problem arise when your newly installed drive is not compatible with your software.....
Thank You friend hope it helped you solve the problem sorry if it hadnt....
You certainly have alot of options for graphics. If this was a one shot deal, maybe you don't have t worry about it. I would probably update my graphics drivers. Are you using on board graphics? If not, I would disable them. I don't believe this has anything to do with your GPU. If you would like to update your graphics driver you can do that here: http://www.nvidia.com/Download/index.aspx?lang=en-us Make sure your resolution is correct in "personalization"
One of your updates might have gone bad. Perform a system restore to get back. Later try downloading the updates individually to spot the bad one. Please do comment if you need more info.
DVD TSST Corp CD/DVDW TS-H552B. Computer crash using DVD+R
I tried using a blank DVD+R 16X and as soon as I closed the DVD drawer the computer crashed. No warning, no blue screen just straight to a restart. If I left the DVD in it cycled through back to a restart. I tried the latest firmware from Samsung but it still happened S10. I then tried an HP firmware update HP13 from their driver update page and all is well. If you need to know more of my computer spec then please ask.
Try going to recovery mode by enabling the hold switch then press the record button then press the menu button until you see on the player screen welcom to recovery mode. Download the update from the sandisk site then install and run it on your computer. Then perform the update. Hope that helps.
×