It means like this Er91-131 Error of the EEPROM controlled from the system control MICRO COM. (SY). Impossible to read/write with the EEPROM (DPR-141A board/IC501)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dear
Clean the main PBA with isopropyle alcohol and warm up with hot air after dry. Try to update firmware and If it was not solved replace the main PBA.
Please speak proper english or atleast tell me what the real problem is.... WHAT MESSAGES DO YOU SEE ON YOUR SCREEN AND ARE THERE ANY ERROR CODES AS WELL?
try to set the toner a few times more, this error code is developer trouble.So it could be that toner isnt recognized, not properly inserted, or you have some tape leftovers on toner, or you have broken developer unit, or ...
roblem : The machine displays an E674 code. This may be followed by an E677 code when the Fax pcb is removed. The imageRunner also has a Print Board installed.
Solution :
With the Fax Board and Print Board installed an E674 code occurred. When the Fax Board was removed an E677 code then occurred. Try removing the PDL Interface pcb for the Print Board from the copier. Reinstall the Fax Board, if the E674 code does not occur and the copier is capable of sending and receiving faxes, then replace the PDL Interface pcb because it may be faulty and causing the two E codes; E674 for faxing and E677 for printing.
Here's the number the Pearl/maax Plant.
For maintenance, installation or general technical queries about your MAAX products, we encourage you to contact us at:
Tel.:
1-888-957-7816 option # 2
Fax:
1-800-201-8308
(418) 387-9086
Have your tub model when you call. They usually are pretty helpful. Sometimes it goes to voice mail for the tech person but they call back after a bit
dear sir i have tally 9 v so my company data is not rewrite done on rewrite position show the massage of EXISTING TALLY INTERNAL ERROR CONTACT TALLY SOLUTION SOFTWARE EXCEPTION C0000005 (MEMORY ACCESS VIOLATION) KINDLY PLZ GIVE ME THE SOLUTION FOR THIS PROBLEM THANKING YOU JAYESH KHARCHE [email protected]
×