Question about Jenn-Air JCD2389G Side by Side Refrigerator
How do I reset the filter change indicator after replacing the filter? The directions state to press and hold 2 pads, but i"m not sure which pads are being indicated by their pictures? Thank you
I had the same problem. Try to press and hold the lock and light buttons at the same time. The light will blink, then release and the light should go off!
Posted on Dec 16, 2008
Can you send me the model of your fridge so i can see what pads you are referring to.
Posted on Aug 15, 2008
Tips for a great answer:
Dec 03, 2015 | Fagor FQ9925XUS
on Jun 17, 2011 | Refrigerators
Mar 04, 2015 | Hotpoint Refrigerators
WATER FILTER CHANGE REMINDER
For some refrigerator models featuring
water filters, the Water Filter Change
Reminder function monitors the life of the
filter and provides a reminder when it is time
for the filter to be changed.
When the system detects either 12 months
of usage, or the filtering of 416 gallons of
water (whichever comes first), the CHANGE
FILTER indicator light will illuminate. This
indicates that the water filter should be
changed and the light reset.
To reset CHANGE FILTER light: Press and
hold the LIGHT and LOCK pads until the
CHANGE FILTER light blinks (approx. 3
seconds). The control is now reset for 12
months or another 416 gallons.
Note: The Water Filter Reminder will
operate if the filter bypass is in place.
If you have other questions please let me know, Thanks Sea Breeze
Jun 10, 2011 | Jenn-Air JCD2389G Side by Side...
Sep 07, 2010 | Jenn-Air JFC2087HRP Side by Side...
May 17, 2010 | Jenn-Air JCD2295HES Side by Side...
Apr 09, 2010 | Jenn-Air JCD2389G Side by Side...
Mar 05, 2010 | Jenn-Air JCB2059G Bottom Freezer...
Aug 12, 2009 | Jenn-Air 21.6 cu. ft. Side-By-Side...
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: