Question about Sony FD Trinitron WEGA KV-36FS120 36" TV

5 Answers

Sony FD Trinitron Vega 2004 Stanby Flashes TV will not turn on

Stanby button flashes. TV will not turn on. I have tried unplug it and turning it back on and still the same problem. How do I resolve this. Sony FD Trinitron Wega KV-34HS420 will not power on. Stanby red light flashes 6 times. The TV works fine for several days then will not power on for a few days. The problem comes and goes! I have unplugged the for 1 minute and this does not help!

Posted by Anonymous on

Ad

5 Answers

Shahid Electronics

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Hi,
It seems problem in BY board in your KV-34HS420 TV. this board is called DRC Engine as well. Its part number and description is ...

A-1302-942-A HBY BOARD, COMPLETE

Its available HERE and price is apporx $82.00
Hope this info will help you out.

Posted on Aug 15, 2008

  • Shahid Electronics
    Shahid Electronics Aug 15, 2008

    Please let me know any futher assistance you need in this regards.

×

Ad

tech expert12

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 521 Answers

THe 6 blinks indicate a problem in the high voltage section. The most common failure part is the horizontal output transistor. This is a 3-legged part attached to a heatsink close by the flyback transformer (part with large red wire coming out the top). Try replacing this part first. That may resolve the problem. The part should be marked something like C5438. This wouldmean that the actual part number is 2SC5438. Please note that this number is only an example. Let me know if that does not resolve the problem

Posted on Aug 15, 2008

  • tech expert12 Aug 15, 2008

    pls do rate the solution.

×

Ad

Jaime Hernandez

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,337 Answers

6 blinks means, LOW +B OCP/OVP(overcurrent/overvoltage) +5 line is overloaded. (A, B, M Boards)
+5 line is shorted. (A, B, M Boards)
This type of failure might be reset if it is intermittent getting into the service menu but you will need to have the service manual to do it.
Let me know if you required further assistance.

Posted on Aug 15, 2008

  • Jaime Hernandez Aug 15, 2008

    Try at your own risk the following procedure. If that did not work, then there is a hardware failure on your TV.



  • Jaime Hernandez Aug 15, 2008

    If the picture is not readable, right click on you mouse and save it as a picture to be able to make it bigger.

    The hardware failure could be due to a defective IC504 that is a 5 volts regulator.

    Good Luck.

×

Asfiya Ahamed

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Dear sir/madam,

Replacing the G board should bring your set back to life. Also check 1.) If the inside of the cabinet is dusty is causes damage to the circuits. Solution: Clean the cab and find/replace the bad circuits. 2.) There is a broken solder somewhere. check out


thanks
good luck

Posted on Aug 15, 2008

Ginko

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sony Master
  • 19,396 Answers

Try first unplugging power cable for two minutes.

Posted on Aug 15, 2008

  • Ginko
    Ginko Aug 15, 2008

    6 blinks on Sony is horizontal failure, it means the horizontal convergence ak IC is faulty and must be replaced.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why power/stanby blinks light red


how many times does it flash? The back of the manual will usually tell you what the flashes mean. Try this: unplug tv from power. While unplugged, hold the power button in on the TV, not on the remote! Hold for 10 seconds. Replug the power and try to power it up. If you get no picture, you need a repair. Contact the manufacturer for an authorized servicer.

Jul 19, 2010 | Sony KDF-E42A10 42 in. LCD Television

1 Answer

TV went off, standby timer light flashing


Try unpluging from the wall and theplug back in and try turning back on to reset. Sometimes holding the power button in while pluging back in will reset it, every brand is different for the hard reset.

Scott

Apr 17, 2010 | Sony FD Trinitron WEGA KV-24FS120 24" TV

2 Answers

Sony FD Trinitron WEGA Standby Light Blinks, TV Does Not Turn On


Sony FD Trinition Wega KV-32HS510 Try to turn tv on -it starts then shuts off -stand by lights keeps flashing. Memory stick light flashes then goes off.

Nov 29, 2008 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Sony FD Trinitron WEGA KV-36FS120 36" TV Problem


The horizontal or vertical output transistors could be suspect in this case.

Oct 17, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

4 Answers

Sony FD Trinitron Vega 2004 Stanby Flashes TV will not turn on


This unit shouldb e flashing a repeated count on the standby light. That count will indicate the circuit in which a problem was detected causig the shutdown. Please post that count and we should be able to provide details on the repair.

Thanks,
Dan

Jul 07, 2008 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Black out


My tv does not turnon and the only thing on is the stanby light

Dec 05, 2007 | Sony FD Trinitron WEGA KV-32FS120 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36FS120 36" TV Logo

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76376 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...