Question about Seagate (ST307504FPA1E3-RK) Motherboard

1 Answer

Mother board or CpU Doesnt work. technician said I have a ghost inside my CPU!

One morning I turned on my computer but my CPU was looking for a bootable disk. I was taken aback first time it happened, so I decided to transffer my hard disk to other computer to check if my hard disk was faulty or impaired. But it works. so I decided to bring it back to my computer but my CPU doesnt recognized my hard disk so I insert xp installation system software, the instalation kit is perfectly do his work, but when the time to boot my CPU for finalizing his works it doesnt recognized my hard disk. Now I tried again but when installer begin to transfer the system needed by my computer at 100% it stop and hang. I tried to contact some technician but they cannot fix it. they said I have a ghost inside my CPU. I tried also to insert dos command to my computer it copy the operating system in my hard disk but when I run it the computer doesnt recognized again my hard disk! I tried to transfer again my hard disk to the other computer the hard disk works Perfectly. why in my computer cannot recognized his own original Hard disk as well as other hard disk? Do someone who is dexterous to fix this problem? thank you.

Posted by MarlonSanoy on

  • Ritabikash Sep 15, 2008

    My Hard drive is looking for a bootable disk. Win XP CD is unable to boot my PC. what should I do now. Please suggest me.



1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 132 Answers

Verify your bios settings with regards to what the pc is expecting in way of hard drive.
Do you have the luxury of another hard drive that you can try on this pc ? - this will 'suggest' where the problem rests.
Make sure the lead is fully located on the back of hard drive.
If possible - change the lead for a 'known working' lead (Maybe from the computer that your hard drive was recognized in)

Posted on Aug 15, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have desktop computer having biostar mother board model M6TWG having intel cpu Pentium III 550 Mhz.

to use win 7 2gb of ram is reccomended, in any case the cpu will be too slow. try a linux light distro instead. bye

Apr 08, 2014 | Computers & Internet

2 Answers


hi! just a tip hope this would help, try to check first the cables comin from the cpu to the speakers. if still doesnt work try to uninstall and re install the audio driver for your computer. hope this would help goodluck!!

Jun 03, 2010 | Audiovox Audio Players & Recorders

1 Answer

I have a T6420, went to turn it on and the fans come on at full speed and never slow down, nor do I get any type of display? What could be the problem? Power supply, mother board, CPU?

I could likely be any of the three items you mentioned.
Are you getting any beeps at all when you start your computer? If not, I would definitely have it looked at by a technician.
A trained technician should test the power supply, then CPU, then motherboard after ensuring fans work properly, CMOS is reset, and components are isolated.

Mar 11, 2010 | E-Machines eMachines Desktop PC

2 Answers

No signal to monitor , checked with another source to monitor it is working fine , not sure what to do next


Have you checked if the cable is well connected to the CPU and Monitor?

Also loose the CPU case and check the VGA card if it well fixed to the board.

If a CPU ram is not well fixed to the mother board, there would never be a display on the monitor.

Lastly, check if electric current is interring the CPU. You can know through the power pack fan at the back of the CPU. And check power cables and socket.

Best wishes.

Dec 28, 2009 | E-Machines T6414 (RBT6414) PC Desktop

1 Answer

Looking for cpu fan or combo heatsink for a foxconn mother board

CPU heatsink/fans are usually sold as a unit at, as well as al other computer supply places. Fan and heatsink are specific and  must match CPU and socket.  

Jan 17, 2009 | Coolmax CPU Fans CPU Fan

1 Answer

My computer doesnt function right

then the problem lies in the main board..aka mother board and it needs to be replaced.....

Jan 07, 2009 | Computers & Internet

2 Answers

I want to upgrade cpu on mother board p4p800

*********** board supports upto 3.2 GHz+ P4 CPU

Dec 03, 2008 | ASUS P4P800-E Deluxe Motherboard

1 Answer

CMOS checksum bad 0085

the problem might lie in the fact that the mother board and cpu cannot be handled at the speed

or it requires the jumpers to be set by so that the cpu can be clocked properly if you got a mother board spec guide follow the guide for *********** board to set up 3.2

you might also have to set the bios to the cpu speed cause if mother board doesnt do jumpers no more the setting would be in bios
hit the delete key direct are power up this will take you to bios
its not the battery

Jun 05, 2008 | Intel Motherboard

1 Answer

Built a new Computer

What cpu do you use just now? Is it a pcie or agp card that you have? Is the ram ddr or ddr2? What you have ram/graphics wise will effect the upgrade path if you wish to continue using them. How much are you looking to spend?

Jan 04, 2008 | ASUS AI Lifestylestyle M2N-SLI Deluxe...

Not finding what you are looking for?
Seagate (ST307504FPA1E3-RK) Motherboard Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Seagate Computers & Internet Experts


Level 3 Expert

13434 Answers


Level 3 Expert

943 Answers

Cindy Wells

Level 3 Expert

6101 Answers

Are you a Seagate Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides