Question about Toshiba 50HPX95 50 in. Plasma HDTV

3 Answers

Power led blinks but no picture or sound

Toshiba plasma 50hpx90 screen went black today while watching. now red power led just blinks but no picture or sound

Posted by plennarson on

  • Anonymous Apr 24, 2009

    Thank you for your advice. I was able to find the small module plug but mine was a PJ63A.

×

Ad

3 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Had the same problem myself. Took some doing but I managed to find a service bulletin that I downloaded. The problem is with the siene module and all you need to do is unplug connector JP63A from the main board and your TV will work again.
Take the back off the TV (there are a lot of screws) and look on the left hand side of the main circuit board that is mounted in the center of the TV. You will see a small white connector that is labelled JP63A, simply unplug it. Plug the TV back in and let it reboot. That's it, should be able to watch immediately.

Posted on Mar 15, 2009

  • Dennis Wolf Jan 02, 2011

    Worked perfectly! Thank you

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The number of the small white connector on my plasma was PJ63A and is located on the left side. Thanks again to mchale420.

Posted on Apr 24, 2009

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 42 Answers

The SEINE module may be bad if you do not watch HD off air you can bypass this module and your TV will come right back on.

Posted on Oct 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I’m having a problem with my Toshiba 42HL196. Once or twice the red LED was flashing and I held the power button in for a bit and it started working again. Today I was having cable installed and after a...


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Mar 13, 2017 | Toshiba 42HL196 42 in. LCD HDTV

1 Answer

I have a Toshiba 50hp66 that the power light cycles from red to green with a simultaneous clicking of a relay on the power board. I check for power at a few points per the Toshiba service manual and iy is...


Check the fuses on the ysus & zsus boards. Are any fuses on boards open . Disconect power cabels to ysus board first {board on left} . put tv on . if the light is green the ysus board must be replaced.

Mar 28, 2010 | Toshiba TheaterWide 50HP16 50 in. Plasma...

1 Answer

Toshiba 42HP66 No Picture, Only Power Works


try replaced z board Manufacturer Toshiba Part Number 75003032 Description ZSUS PCB ASSY

Oct 02, 2009 | Toshiba 42HP66 42 in. LCD Television

1 Answer

I have a Philips Plasma tv 42pf5321d/37 with sound but no picture


Thats the great sound of Exploding capacitors on either the power supply board. or another one in there. Now the set is in fault protection. It tried to warn you with the RED blinking LED that there was something amiss by shutting itself down. When you unplugged you reset the error and allowed it to do it again.

Best Regards and Smper Fi

Jun 23, 2009 | Philips 42PF9630A 42 in. Plasma Television

2 Answers

Toshiba 42HP95 Plasma tv


http://www.fixya.com/support/t101749-tv_turned_itself_off_turn_back

Worked for me, was ez, and I am a huge skeptic and not very "TV technical."

Dec 23, 2008 | Toshiba 42HP95 Television

5 Answers

Philips 42 in. Plasma shut down


did u cheak the input cables does it do it on dvd input as well as others ?

Feb 01, 2008 | Philips 42PF7320A 42 in. Plasma HDTV

1 Answer

Screen went black


I am working on one right now with a similiar problem. The power supply is bad in the one I am working on, and sadly, the part is not made anymore. I hope you have better luck than I am finding the bad component in yours. Sorry for the negitive answer.
Ed
NC Electronic
Mills, Wyoming

Jan 06, 2008 | Televison & Video

5 Answers

Philips 37 flat screen


U better have it checked by a qaulified tech

Sep 09, 2007 | Initial HDTV-322 32 in. LCD Television

Not finding what you are looking for?
Toshiba 50HPX95 50 in. Plasma HDTV Logo

1,264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76352 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...