How do I add more ram to Packard Bell Notebook

Sounds like the memory is incompatible with the laptop. Remove the memory and install orginal memory and boot again to see if every works correctly.. If so then either a memory module is bad or motherboard wont support the new memory (size or type)

Hello Wallace.

http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=9B9F5310A5CA7304

Try this, i think that`s it.
mfg Gue.

P.S.: Do you know Gooooogle ?

Upgrading the RAM on the Packard Bell BG45-U-300 http://www.youtube.com/watch?v=CEBJfLx9Kzk this might not be your specific laptop it might give some insight into ram upgrade If you're not sure if a module is right for your system, use the Crucial Memory Advisor tool for a list of guaranteed compatible modules. First you will need to select the manufacturer from a drop down list then select your product line from a drop down list then select the model then click find it will take you directly to compatible ram also you will have an option to scan your system. You should always ask for a guarantee on the compatibility before making any purchase and try to buy for working pairs if possible.

Try RETREVO.COM

try to review your connections.

Hope this one helps:
http://www.general-search.com/download/packard-bell-laptop-mit-gha20-ound-drivers-xp

Always get your drivers and specific software from the manufacturer of your Laptop, Notebook or Desktop. They are usually free of charge.

If you were to log on to the manufacturer's web site, usually one is able to download if available, by model number, All available Driver downloads as required.

If the driver is not available, perhaps your manufacturer does not support the OS you are installing.

This is the best way of ensuring up to date drivers for your system and they are free of charge!

I hope this helps.

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers, for spare parts and service, Driver downloads and Installation Instructions as required.

This is the best way of ensuring up to date drivers for your system and they are free of charge!

I hope this helps.

check your power adapter to see if the light is on the adapter to indicate it is getting power to your system

If you look along the top edge of the escape/function/del keys, there are several small plastic tabs that hold the keypad in place. Use a very small flat head screwdriver to push these back from one corner across to the other, gently lifting the keypad as you go. When you press back the last tab, the keypad should just pop out but take care as it's connected by a cable at the bottom edge of the keys. The RAM slots are located under a thin metal cover under the keypad. You'll need a very small philips head screwdriver to undo this. After installing RAM, replace the metal cover then pop the keypad back in, bottom edge first and just press down the top edge and the plastic tabs should snap back into place. Hope this helps!