At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That's a real problem. Do an internet search, call technical support, send them an email. I ended up getting rid of a printer that had one light that always stayed. on.
When the toner supply belt is broken or displace than toner not supply from the cartridge in the DV unit.You shuld check this drive section and replace new one.I wish best luck.
Kyocera toners usualy have red/orange coloured tabs which should be removed prior to fitting. The Kyocera Mita web sites often have instuctions on fitting, the Austalian site is particulary good for tthis type of info.
When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.
You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.
This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.
A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.
When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.
You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.
This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.
A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.
if copies and printouts are the same then do the following... if only copies then change your scanner lamp
make sure you are using kyocera toner... empty developing unit and run sim mode 131.... make sure that you have changed the transfer assy.... thats the black roller on the door... also play with sim mode 101....
×