I have an Epson R380 printer and print when I send it to print so that blurs the whole leaf on top of it printed. it does print the test by computer as to maintain the printer itself

Hi,

Try to visit below link.

Epson Stylus

the heads are clogged. specially yellow. use the software included to have the head cleaned.

You will have to keep collabrating the colors on your monitor until you get the right print out. If you're not using the right ink this will also throw off the print outs. Epson R380 is not really your avg high end printers so you will not get the best results. I suggest look for a monitor collabration software to correct your problem.

All ink jet printers act this way. All carts must have ink in them.

Printer head is clogged, be sure to clean it until you get the solid lines

Please check to make sure you have not set the default trap position in MS Word to be CD. That would cause this problem as you would be expecting it to send through as letter.

send for me manual epson stylus cx5500

Hello:

I have been having this problem all day today and believe I resolved it. The photo paper is thicker (I'm using the Ultra Premium Photo Paper by Epson). I have an Epson 1280 photo printer. I opened the lid and moved the lever to adjust for paper thickness, and voila––no more black ink tracks down the one side. Since photo paper is thicker, this may be your problem as well. Check your manual and see if there's an adjustment for things such as printing envelopes and change the setting. Hope this works for you! I wasted about 6 sheets of paper until I thought to adjust for paper thickness. Please let me know!

Susan
York, PA
[email protected]

First click "Print" in there you will see "Adjust print position", adjust to 0.1mm up and 0.1mm left this should center. Depending on the label you're using you will have to keep adjusting until you get the right result.

You can only print with date and by date when you are using a memory card, but when you're printing directly from a camera you should have an option or a setting on the camera to print the date information. Hope this help...