Hi, I have a panasonic kx-t7633. we can dial all the numbers but not those starting by 76 which is the code for mobile phones. How can I assign the line 4 to dial these numbers?.

You don't. It's looking for an ACCOUNT number, which are assigned by the system manager. The number you have dialed is restricted by class of service. If you have a class override code, you can use that, or go to a different phone.

It's a trick. Assign the button, then press PROG the button, and dial 2 then 9, or whatever your access code is for an outside line, then the number and ENTER. You can press more buttons and dial more numbers, or press EXIT to quit.

Carl

What happens when you dial *3301 or *3332 on the intercom? At installation, phones are assigned paging groups, and they usually fall into group 1 by default. There are codes that can lock phones out of paging (each user can do it himself) and 32 is all page groups. Anybody can dial *43 on the intercom to join a paged call.

Carl

as long as you have COS 'class of service' rights you can dial -
*7102 9 (phone number) #
this will forward all your calls

to cancel - dial *7100

Dial *7105 then 9 then number to dial then #

call forward external needs to be enabled on your system

Exactly what are you programming under the button and are you putting an ACCESS CODE in the number? When you go to the intercom, try dialing "9" or whatever you use to get an outside line. If you use a special line to dial out because you're calling a mobile, then you need to dial 80x instead of 9.

Just an idea.

Carl

Try this....

For Panasonic system (especially for KX-T7633), you have to make changes from extension 101.
1. leave handset in the cradle then press "program".
2. Dial *# then "SP-PHONE" button until you see something like time set something something
3. manually input correct date then time then press "auto dial/store" button.
4. pick up the handset then hang up to save.

From the system administrator's phone, enter programming and dial 000 and follow the prompts using the FWD and CONF button to move the cursor back and forth.

Carl

On the intercom dial *71x1 where x is 0 for all calls, 1 for outside calls and 2 for intercom calls. *71x0 cancels, or you can just press the FWD/DND button until it goes out.

Carl

This, my friends, is a very popular problem. It is caused by someone else in your company pressing the Message button on their phone while you are calling them or they are calling you. We strongly recommend to our customers that no one presses the Message button under any circumstances. To access your voice mailbox, always dial the Automated Attendant access code assigned by your installer - usually 165 (although on our systems it is "62" or the letters "MB" for MailBox).

You need to dial the Message Waiting Lamp feature code and dial "0" for the extension number. The code itself varies from system installation to system installation, but the most likely numbers are *70 and 70.


We have a support package that allows us to make all the changes you need over the Internet for a flat annual fee. If you want your whole system to work properly and all changes to be made for you at a flat budget, call us at 877-236-8376.