I forgot my password to get into my motorola wx295 cell phone, do you have any default password for me to get into my phone please

Ken-

Check out http://motorola-mobility-en-hk.custhelp.com/ci/fattach/get/455243/1341405383/redirect/1/session/L2F2LzEvdGltZS8xNDExOTg3MTYzL3NpZC9SeU9UVEIzbQ==/filename/WX265_WX295_ENG_HK_QSG_2010-10-08.pdf

Mark
Motorola Support

The external screen is very simplistic. Can you tell us more about what the external screen looked like?

PUK stands for Personal Unblocking Key. This is a unique eight-digit code specific to your SIM card. This is required when the PIN number to unlock your mobile phone is entered incorrectly 3 times. You are then given 10 attempts to enter your PUK code. If an incorrect PUK code is entered after the 10th attempt, you will block your SIM card permanently and will require a new SIM card from your mobile phone provider.
PUK codes can be obtained through the following ways - The PUK code is in your SIM card documentation Starter Pack. If you do not have this then - Please contact your phone service provider.
Your cell phone service provider can give you the PUK code once you give them your account details and they have confirmed your identity. For details to obtain the PUK code for the SIM card, please click on this link and follow my instructions.
http://www.fixya.com/support/r5705889-puk_code

phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Try a MOTOROLA UNLOCK CODE website to get the codes to unlock your Motorola wx295. They provide a quick and easy way to unlock your phone. Just specify your phone brand and model and please determine the IMIE numbers also. It has 15 numbers. thanks

If your reffering to a bluetooth device, the standard bluetooth passwords are:
0000
1234
and rarely 1111

TRY SIX ZEROS

default password is the last 4 digits of your phone number...unless you've changed it....then you need to go back to your cellular provider.

you can use default password 0000 or 1234 and reopen your phone

ranjithnairv + hardknox - press the menu key in the middle of the keypad, scroll to initial setup then select either master clear or reset and enter the 000000 as the security default codes.

all others take the phone to a mobile service center and have them reset the phone codes back to the originals for you.