Mouse does not work with my MacBook Pro (OS X v.10.6.6) I have tried installing Macally Input manager v.1.2 but it does not even find mouse...'continue' is grayed out. Also tried USB Overdrive-301 but alas to no avail doesn't find device. I'm pretty sure device works, as my son tested it on a PC (where it worked! Huh! Grumble) I'd be obliged of any info. Yours e.t.c

It sounds as if it is dead and you may have to purchase another, (obviously check batteries connections first) find out if there is still warranty left as i'm not sure if it will be classed as a consumable.

DriverPack Solution driver update software Download Windows 7 XP 10 8 and...

This controller might not be compatible with Mac OS X. Try to Google the name of the Macally joystick + Mac OS X. I think you might be able to find a driver.

Check the jumper on each hard-drive.

My guess is that the WD drive has the jumper in the "correct" position, for mounting inside an external case, while the other drives have their jumper set to an "incorrect" position.

Set the jumper to MA(ster), not to SL(ave), nor to C(able)S(elect).

Once it turns on, use the mouse and either try updating keyboard drivers from device manager under the control panel, or last resort, try system restore

it could be this mbox thing isnt compatible with intel chiped macs. did you check their website for minimum requirement and compatibility? any of your friends have the same laptop of yours and theirs is working?

did you google "macbook pro not working mbox 1" for forums that relate to you

Normal 0 Try disconnecting the Mouse Receiver from the USB port and reinstall the CD software program. When the program asks you to connect the Mouse Receiver to the USB port, do so and it should work.
Hope this helps. Bud

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.

Q: After pairing my mouse, the button click works but cursor tracking does not move. What can I do?A: The cursor tracking problem is because red sensor LED is not on. Please try another set of battery or fully charge battery again, and verify if bottom red LED turns on. If red LED still does not turn on, please remove batteries from mouse, press and hold the pairing button for 5 seconds, next press and hold the left and right buttons simultaneously for 10 seconds, followed by several clicks. Install the battery into mouse, you should see red LED turns on, mouse cursor will move.