PLAYSTATION DOES NOT READ ANY DISK AT ALL, AS SOON AS YOU ENTER DISC, BROWSER SCREEN COMES UP. AND WHEN YOU CLICK ON BROWSER, JUST THE MEMORY CARD POPS UP. DOESNT SAY ITS READING AT ALL, IT.DONT EVEN SOUND LIKE ITS SPINNING ANYMORE. HOW CAN I FIX THIS PROBLEM..???

put disc cleaner in its dirty.

if it's a fat PS2 and
model SCPH 30001, SCPH 35001
(not including the models with an 'R' after the model #.

these models need the following to play DVDs:
- PS2 DVD remote with IR unit
- PS2 DVD disc player (sold with DVD remote w/ IR unit)
- PS2 memory card

you copied the DVD disc to the memory card. you used the memory card to play DVDs.

later models didn't need the memory card to play DVDs.

hope this helps :D

th game must be scrated badly and your system wont read the disc but cool story dood

try going to the version press the triangle button then go to the console then enter then turn on the diagnostic then put the disc then go to the browser then wait for the cd to pop.(DO NOT TURN OFF THE PS2 OTHERWISE THIS MIGHT NOT WORK.)

go exchange for a new disk. this is may be defective.
it happens. it shouldn't cost ou naything for exchange to the same title.

I BOUGHT A PS2 GAME YESTURDAY AND IT DOESN'T WORK

Disc Read Error generally means that the game disk cannot be read by your console.

Reasons for Disc Read Error
1. Disk surface scratched or smudged.
2. Disk surface dirty.
3. Lens surface dirty.

Here is what you can try doing.

1. Check the game disc for any scratches or smudges on the surface of the game disc, try to clean them off by using a non-abrasive cotton cloth.

2. If the PS2 console is lying down, please set the console to on its side or if it's on its side set it to flat position, restart the console and then try game again. Always ensure the PlayStation 2 is in a cool, well ventilated place.

3. Remove and reinsert the Memory card of your PS2, restart the console then try running the game again.

Other troubleshooting that you can try.

Change the Disc speed of the PS2 DVD and then try again.

Start the PS2 with no disc in a drive. Press the "triangle" button on the controller.
Use the up and down buttons on the controller to select "Playstation Driver” and press the "triangle" button on the controller.
Select Disc speed. If it is set to "Fast," select "Standard"; if it is set to "Standard", select "Fast" and press the "X" button on the controller. Press the "O" button on the controller. Insert the game disc and restart the PS2. Try running the game again.


Turn the Diagnosis On for PlayStation2 to auto detect the best settings.

From the Browser and System Configuration menu. Press the triangle button to select Version. Highlight the Console from the list and press the triangle button - this accesses the next menu option. The Diagnosis will be highlighted. Press the X button to access the options available. Highlight "ON" and press the X button to affect the change. Restart the console and try the game again.

If the above steps does do not solve the error then you would probably have to replace the disc.


Note: If you are using the Slim version of PS2 make sure that the console is properly ventilated and that it should always be in the standing position, as the slim version of PS2 no fan or any other cooling unit unlike the normal PS2.

sounds like you have a laser eye off track,or dirty one.try using a cleaning kit first this may solve your issue without having to do anything.if this doesnt solve it then please post again and i will walk you through what we need to look at

I had that same problem, Just purchase a cd lens cleaner and it worked.

yes you do need to get the drive cleaned you can get a laser disk that cleans it from either game or playstation or maybe online they usually work