My jensen uv8 display will only show when i am closing the screen anyone have any suggestions?

CALL 919 562 5445

no the code should work . unless jensen put a stop to the code in the newer modles.

I just bought the uv8. Ist I must say i hate it, it was the worst purchase made. Amoungst others problems, your answer to solve no audio is this.

<<push mute button>> then volume up. you'll have sound. good luck

Ebay

Ipod controls usually go to the cd changer input or auxiliary input. They might have just updated the the looks but usually the inside is the same, especially if they have the same model number. By the way you can get that ipod cable really cheap on ebay.

I have same problem with same uv8 but i use remote to activate am/fm then hit setup on rem.enter 543210 and a new menu came up. ( listening for the beep after each 3 is pressed ) select the hammer in upper left hand corner of screen, select brake bypass to on, then hot the X near bottom os screen. this works for me it should work for you.

bypass

customer support suggested this: Turn the volume control, and while the yellow speaker icon is still visible, press and hold the volume control until you here a double beep. This confirms the new volume setting.

jensen is not such a great brand for indash. if you have the receipt or warranty you might want to return it and get yourself a new one. I know this because when i bought my phase linear i didnt want to eject the cd and the guy told me that they come very defective sometimes

Sounds to be defective. All white is not normal under any conditions.