X8350 Lexmark won't communicate with PC. It happened after I changed to ADSL

Read wners-manual Lexmark Lexmark X8350 Owner Manual

Read Ownwer's manual
Lexmark Lexmark X8350 Owner Manual

You may download the X8350 driver from http://support.lexmark.com/index?locale=en&page=product&productCode=LEXMARK_X8350&segment=SUPPORT&userlocale=EN_US&frompage=null#1

A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.

If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.

Hi:

When you first loaded the print driver there should have been a box to check to enable bidirectional communication. Most Lexmark printers require this to work properly



Andrew.

You can download the Lexmark X8350 driver from the Lexmark website for free. Note: Lexmark X8350 works on Windows operating system only. Use Vista driver on Windows 7.
Go to this link Lexmark X8350 Drivers. Select your operating system version by clicking on change OS.


Click on FILTER.


Then click on Complete Driver under Recommended Downloads.
Download, execute the file and follow the instructions on the software.
I hope this information has been helpful. Thanks.

Here's the instructions (Click Here) on how to install or replace cartridges on Lexmark X8350.
Here's another (Click Here), open the link and scroll down to Page No. 4.

If you have problem, let me know.

Good Luck.

Thanks for using FixYa.

Unfortunately, Lexmark has not as of yet released a driver for your machine x8350 that is compatible with Windows 7. The list of printers that currently have drivers for Windows 7 is here: Lexmark Windows 7
Although the trend is to blame the printer manufacturer, the issue is on Microsoft. They tend to release operating systems without giving manufacturers sufficient time to create software to run their devices. The same thing happened with the release of XP and Vista. Sorry, wish I had better news.

I fixed this by completely uninstalling the Lexmark software, then unplugging the USB and restarting. I then installed the new Lexmark software that I downloaded from their site, make sure not to plug the USB back in until it told me to. It then detected the printer properly and started working.

hi try this...go to start- all programs-lexmark X8300- lexmark solution center ,
on the solution center page click on the last tab on the left hand side...u have an option for the voice notifications...