Grundig G2000A Clock Radio Logo

Related Topics:

A
Anonymous Posted on May 16, 2011

Grundig G2000A Clock Radio problem: Low battery indicator is blinking, I change the batteries with new ones but it still shows low battery and the radio does not work. I tried an adapter but nothing changed. Low battery indicator is blinking and the radio is not working.

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Aug 12, 2008

SOURCE: Grundig sonoclock 420 radio/alarm

Hello Sally,
here is the solution :)


https://dex.grundig.de/GIM/internet/document/GKL0151D.PDF

maybe it doesn´t work try this site and choose

http://www.grundig.de/index.php?id=9

Greets
miieke

Ad
A

Anonymous

  • Posted on Oct 21, 2008

SOURCE: Nakamichi TM1 clock radio

Hello,

Sounds like the s

Anonymous

  • 6 Answers
  • Posted on Jan 10, 2009

SOURCE: Intermittent volume level

Radio Shack does provide a volume control cleaner that you could gently spray to clean the contacts, but you may simply have a defective knob. (The first S350DL I bought had a defective volume control.) Don't hesitate to call Eton Customer Service either.

I hate to say this, but I've become a little wary of buying radios at Radio Shack. I have a suspicion that occasionaly radios that are returned get "recycled" back into stock rather than sent back to the manufacturer. I had to return 2 radios directly to Eton / Grundig after getting back to back defectives at RS.

Anonymous

  • 1 Answer
  • Posted on Aug 19, 2009

SOURCE: Grundig yacht boy 400 radio does not work with mains operations

hello i have a grundig mini-300 radio , the volume control is stuck in high range . i have had many problems with this radio , i would love to talk with one of your representives . please call me at 585-313-3188,,thank you ,,,,nicholas ferrara

Bruce Williams

  • 2 Answers
  • Posted on Jan 27, 2011

SOURCE: Grundig Satellit 700 World Receiver. AM bands are dead.

Ist Local Oscillator (PLL) stops working. It's desiged with bare minimum feedback to keep it's output reasonably clean. Removing (De-soldering) the screening box reduces losses, but it's still marginal. Something in the osc. circuit is temperature sensitive, so squirting it with freezer spray - or putting the set in the 'frig will get it going again. Have one like this, "Repaired" - been going for about 5 years and just quit again! If I get any better luck next time, I'll re-post this!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Grundig 750 'Satellit' radio. Works fine on batteries, new power supply AC-DC the radio shuts off or displays LOW on screen.

On the rear where the power adapter plugs in, it should show in input voltage and polarity. Check the power supply output voltage with a volt meter. Generally, it is the sum total of all the batteries, so it if takes 4xAA @1.5 volt batteries the voltage would be 6 volts DC. It sounds like it is faulty.
0helpful
1answer

Dcr15 dewalt radio flashed red when plugged into wall single flash help please

Occasionally, the charger might show blinking red right to indicate bad batteries. ... This indicates that the battery already have a full charge. If charging is needed, briefly drain the batteries before trying again. If the light blinks red in about 90 seconds after battery insertion, then the battery voltage is too low.


0helpful
1answer

Volume is low what could be the problem

The Power Supply voltage could be low..If you're using battery, replace them with new ones...otherwise check the power supply voltage as per specification of the model.
0helpful
1answer

The low battery light remains on after I changed the battery,

Hello
There are two possibilities for this fault. The first one is with its battery itself. If the battery did not hold current, in otherwords, it has weak, proper charge both in volts and amperes won't hold on it, and when the device draw current from it while it works, voltage drop will occur, and low voltage indication will be displayed.
The second chance is due to the charger circuit inside the radio. If charger circuit do not give proper voltage and current to battery, the battery won't charge to its full capacity.
Check it by replacing it with a new battery [batteries] first. If it helps you it's OK. If not, your radio need service, and its charger circuit must be checked well. OK.
1helpful
1answer

The a/c power wont work. Tried several different

Hi,
check the power plug used to connect the clock radio to the mains power,if it does not come on.then you have to open the back cover of the clock radio to check for blown fuses, because this are the common problem found in electronics appliances.
Also check the transformer with the use of an ohmmeter, to read if the components are okay.
Good luck.....
1helpful
2answers

I have a Dell dimension 9150 which is 2 1/2 years old. Does it have a battery that I need to be concerned about replacing. I remember that used to be a problem with computers but don't know if that is...

Hi,
Every PC motherboard has a battery. That battery serves two purposes: to feed the configuration memory (also called CMOS) and to feed the real time clock of the computer (the one that show the date and the time).
An indication it is time to change the motherboard battery is receiving one of the following error messages when you turn on your computer: CMOS CHECKSUM FAILURE, CMOS BATTERY STATE LOW, CMOS SYSTEM OPTIONS NOT SET and CMOS TIME AND DATE NOT SET. Another indicator of a low battery is a clock that, after being set, runs well while the computer is on, but shows the wrong time when the computer is turned on the following day (it is late).

6helpful
2answers

What does a blinking "cl" mean?

I believe "CL"indicates clock. Change the clock settings at the lower right corner of the answering machine.
0helpful
1answer

Emerson SmartSet Dual Alarm Clock Radio Won't Stop "Flickering"

Problem was solved. When clock was plugged in after a few more days, it finally stopped flickering and reported an incorrect time and day. Low battery was now blinking! Checked calendar and found all memory was lost. Purchased and installed a new battery and this time when clock was plugged in it correctly set itself! Fixed.
1helpful
1answer

Radio

Hi - You can download the manual from the link underlined in blue below:

G2000A

428dabe.jpg

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica
1helpful
1answer

I need to know how to set the radio presets for the Grundig.

If you go to this link; http://www.amazon.com/Grundig-G2000A-AM-Shortwave-Radio/dp/B00000JD4T/ref=pd_bbs_sr_3/104-1966292-9407907?ie=UTF8&s=electronics&qid=1175876962&sr=1-3 This is the same model, and under "product details" you can download the manual. Page 21 of the manual (page 10 of the pdf file) should tell you what you need to know. Hope this helps :)
Not finding what you are looking for?

295 views

Ask a Question

Usually answered in minutes!

Top Grundig Audio Players & Recorders Experts

k24674

Level 3 Expert

8093 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Grundig Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...