Hi for anyone reading this! My 60s was just flashing with this but I fixed it. Took the batteries out, swapped them and that didn't work. Tried to put the old ones back in a few minutes later and then it was fine! Just fiddle around with it. Hope this helps.
SOURCE: battteries depleted messageon Pentax Espio E40, even though have tried brand new batteries.
HI. this seems to be a battery scanning fault in the programming. try to reset the board by pulling the battery and removing all power of 30 minutes. completely drain all power from this unit for 30 minutes. if this message continues after you have rest the programming, this will confirm a serious fault within the internal program. you will have to send this device back to a pentax repair terminal for reprogramming.
SOURCE: I need a manual for
At the support section of the Pentax website, you can download the manual for every camera they ever made.
SOURCE: I need an owner's manual
Go to the support section of the Pentax website....you can download a copy to your computer.
1,022 views
Usually answered in minutes!
×