- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it indicates fixing unit temp could not raised to predetermined value. The following steps may be taken to clear the error.
CLEAR>ENGIN>ERRLR; and then turn OFF and then ON the power.
2.Check connection of the Connectors (Thermistor Connector and AC Connector).
3.Replace the Fixing Assembly.
4.Replace the DC_CON PCB.
Hi, these is error code related to fixing heater temperature fault. Because you didnt state the model of copier ill gave you the procedure for most copiers of digital serie of Canon, these service mode procedure doesnt apply on iR 2016/2020/2018/2318/1600/2000....
press * press 2 press 8 press * select COPIER select FUNCTION select CLEAR select ERR OK
Turn off and on the copier.
If these doesnt clear your error you need nto change the fixing film assy ( heater ).
How to clear fuser abnormality codes (F34, F35, F36), 2020.
Solution: To reset fuser codes, perform the following steps: 1. Access the 25 mode (power the machine OFF. Hold down the 2 and 5 keys, and power the machine ON). 2. Press P-4-7-P on the key pad. (1, 4, 5, or 6 will be displayed on the copy quantity indicator). 3. Press the 0 key to change the indication to a zero. 4. Press the start/print key to enter the new data. 5. Power the machine OFF then ON to exit the 25 mode.
If the code comes back then your fusing unit will need parts/service.
Simultaneously press and hold the 1,the Stop
and the Power Save buttons on the Control
Panel,if problem continues repeat the same
with 6,the Stop and the Power Save buttons 4,the Stop and the Power Save buttons 3,the Stop and the Power Save buttons