TI-85 manual I am looking for a TI-85 graphing calculator manual. Do you know of one I can download?

Record the error number. Go to the manual and read about that error and ways to avoid it.

The first graphing calculator was invented by Casio Computers. of Japan in 1985 It was the Casio FX-7000.The lead engineer on the Casio 7000 development team was Hideshi Fukaya. About 5 years later, Texas Instruments introduced its first .
The Ti 84 Plus was introduced in 2004. Before the TI 84 plus there werer other graphing calculators by TI: 80/81/82/83/85/86/92/73

You can download the manual from the manufacturer's web site at
http://education.ti.com/calculators/downloads/US/Guidebooks/Detail?id=6128

There's also an aftermarket book:
http://www.barnesandnoble.com/w/ti-89-graphing-calculator-for-dummies-c-c-edwards/1013991784?ean=9780764589126&itm=1&usri=ti%2b89%2bdummies
If you're lucky, a local library will have it.


http://www.barnesandnoble.com/w/
ti-89-graphing-calculator-for-dummies-c-c-edwards/1013991784

Press the TABLE key, then the F2 key to select "TBLST".

http://education.ti.com/downloads/guidebooks/graphing/85/85book-eng.pdf

Yes. To get to the table functions, press the TABLE key. To get to the trace, window, and other graph functions, press the GRAPH key.

Hello,
Read the following answer from the TI Knowledge Base.
Hope it helps.

How can I troubleshoot an Error in Xmit error message when transferring data between two graphing calculators?

The Error in Xmit error message is returned when a connection cannot be established between two calculators when attempting to transfer data. There are several factors that can contribute to this error message.
• The calculators being connected are not compatible for data transfer.
• The data cable is not firmly connected to both units.
• The receiving calculator is not in receive mode.
• The I/O port on one of the graphing calculators is damaged.
The procedure for connecting two graphing calculators is as follows:

• Connect the data cable to the I/O port of each unit. The cable will fit tightly in the I/O port and snap into place. If silver from the cable is visible, the cable is not properly connected.
• Access the Link menu on each unit
• Place the receiving graphing calculator on "Receive"
• Place the sending unit on "Transmit" or "Send" from the Link menu.

Once the data has been selected, the transfer will commence accordingly.

The data transfer protocols for graphing calculator is as follows:

• TI-73 - Link allows data sharing with another TI-73, TI-82, TI-83, and TI-83 Plus.
• TI-82 - Link allows data sharing with another TI-82.
• TI-83 - Link allows data sharing with the TI-82, TI-83 family calculator, and TI-84 Plus family calculator.
• TI-83 Plus/TI-84 Plus family- Link allows data sharing with another TI-82, TI-83 family calculator, and TI-84 Plus family calculator.
• TI-85 - Link allows data sharing with another TI-85(To a TI-86. Not From a TI-86).
• TI-86 - Link allows data sharing with another TI-86 and from a TI-85 to a TI-86.
• TI-89 family- Link allows data sharing with another TI-89 family calculator and from a TI-92 family calculator.
• TI-92 family- Link allows data sharing with another TI-92 family calculator and from a TI-89 family calculator.
• Voyage™ 200 - Link allows data sharing with another Voyage 200 and TI-92 family calculator.



If the cable does not fit properly into the I/O port, or if the I/O port appears to be damaged (broken or separated plastic, obstruction inside the port), call 1-800-TI-CARES (1-800-842-2737) M-TH 8:00 AM - 7:00 PM FRI 10:00 AM - 7:00 PM Central Standard Time to speak to a representative or sending an email to [email protected].

Page 1-3 of this manual discusses adjusting the contrast of TI-85.
http://education.ti.com/downloads/guidebooks/graphing/85/85book-eng.pdf

You can download the manual for free here:

http://education.ti.com/downloads/guidebooks/graphing/85/85book-eng.pdf

Turn up the contrast. [2nd] [up]