Question about Rockford Fosgate RFP3410 Car Subwoofer

1 Answer

RockfordFosgate p2 series

I bought 2 rockford fosgate p2 series with an audiobahn amp. my boyfriend hooked up the system in my 2008 hyundai tiburon. they bridged them and they were going very well. they have been in there for about a month and a half. recently, they have been making a steady bass hum, even when the radio is off. when i turn my lights on and off, i can hear it clicking in the subs. also, when the positive is touched on the back of the box it makes a very loud beat sound like bass. when i turn the radio up, i still have bass and the sound can't be heard. What could this be from? I was thinking maybe the RCA cables are cheap because I got them from wal-mart.

Posted by aka_brittany on

Ad

1 Answer

Kristy Neff

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 155 Answers

I would get a good pair of RCA's that might help. if not they also make a noise filter that you can add to your RCA's, bad ground could be the problem to.

Posted on May 11, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just bought an '02 Honda Civic SI hatchback that


you have to understand impedance to do this. how many ohm are your 12,s`? you can run all 4 subs in mono off one amp if wired right. it works like this, lets say all 4 of your speakers are 4 ohms. if you wire 2 4 ohm speakers in a series it looks like one 8 ohm speaker to the amp. if you wire them in parallel the amp sees it as 2 ohms, ps most amps cant handle less than 2 ohms in sereo 4 in mono bridge. so no if you take one pair say the tens run them in series now take the 12 run them in series. now take and parallel both sets to amp and you have a 4 ohm load. to better understand do a google search for series parallel circuits. also you amp should be marked for bridging if not look up the amp on the manufacturers web site most will let you download the owners manual for free if in doubt about your amps ability keep it at or above 4 ohms

Jun 24, 2011 | Sony Car Audio & Video

1 Answer

It was hooked up to a 2 or 1 ohm load now it dont work


if it was hooked to a 1 ohm load its most likely fried. what watt were you trying to push?

May 29, 2011 | Rockford Fosgate 25 To LIFE Punch 150...

1 Answer

I have a old 2001 rockford fosgate 2 channel p5002 model in great condition just need to know how many watts is it and which subwoofers are compatible to this amp? thanks


Your amp is rated at 500 watts. Here is the break down of your wattage.

125x2 at 4 ohms
250x2 at 2 ohms
500x1 at bridged 4 ohms

When hooking up the amp make sure to use 4 gauge power and ground wire.

Jan 07, 2011 | Rockford Fosgate Punch P5002 Car Audio...

1 Answer

Hey i was wondering on the model punch 325.1 rockford amp what positive and negitive hook ups do i use for bridged channel.


the amp is a mono block so there is no bridge mode. The 2 speaker terminals are provided for easy connectivity of multiple speakers

Jun 05, 2010 | Rockford Fosgate P3001 Car Audio Amplifier

1 Answer

Why does my 6x9 amp drop or not let the sound play at all when my subs are on? it just started to happen? they worked together fine before. i turn the subs off and the 6x9 work? but when i turn the subs on...


You probably have too much hooked up for the size of your power supply which is presumably a small car battery. You either need to get:

A) New, better bigger battery.
B) Capacitor in series with battery.
C) Both of the above.

Mar 08, 2010 | Rockford Fosgate Punch Stage P212 S4 Car...

1 Answer

I have a rockford fosgate 550 that the fuse blows


Short inside one of the transistors. This requires very good soldring skills and electrical know-how, and some thermal paste to go between the heat-sink and the transistor. Unfortunatly this is not a cheap repair, probably cost around 100 dollars.

Cheers,

Kevin

Feb 09, 2010 | Rockford Fosgate Punch P550.2 2-Channel...

3 Answers

Wiring diagram


run them in sereis hooking them all up together and bridging the amp

Jul 22, 2009 | Rockford Fosgate Power 1500BD Car Audio...

1 Answer

Quick question, amp problem


make sure you ground wires arent shared, meaning run each ground wire from each amp to its own grounding point

Sep 08, 2008 | Rockford Fosgate P3001 Car Audio Amplifier

2 Answers

Rockford Fosgate 800a2 To 2 SVC 2ohm subs


Ok.. Bridge the two sub into 4ohm than bridge to amp.


So. this how it goes.

sub1 + -
to      | |
sub2 - +
=      4ohm
       

           From Sub
                Two
            -          +  
            |           |
amp (L) - + (R)- +


This will use the full potiental of RF 800a2 amp. I believe it like 1153 watts max out.

Sep 26, 2007 | Rockford Fosgate Punch 800a2 Car Audio...

Not finding what you are looking for?
Rockford Fosgate RFP3410 Car Subwoofer Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rockford Fosgate Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

93 Answers

Robert Rankin

Level 2 Expert

378 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Rockford Fosgate Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...