1. take off the front wheels by squeezing the two buttons on the aluminium tube just up from the wheels.
2. slide the metal clip up the groove in the tube.
3.use the two velcro straps around the tubes that support the rear wheels to hold up the rear of the basket.
4.re fit the front wheels and make sure the buttons snap into the holes in the tube
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 2007 model came with a single thick seat fabric which customer feedback indicated became too small for older children, so the 2nd stage seat fabric was introduced and all Buzz models between 2007-2010 have two seat fabrics depending on the age and size of the child using it. The 2011 model has a single seat fabric suitable from birth right up until about 3.5 years of age.
In addition improvements have been made on the chassis overall as with any new product each time a new updated version is released but the basic chassis structure remains the same and spare parts are interchangeable to an extent.
The 2007-2010 models would have come with the Buzz box as standard, and the Buzz shopping basket was a seperate accessory: For the 2011 model the Buzz shopping basket comes as standard (Customer feedback indicated it would be more popular and useful) and the Buzz box is a seperate accessory.
Hi, I sell all spare parts for the quinny buzz 3/4 and I ship worldwide, I have just sent wheels & shopping basket to USA. You can contact me at; <a href="mailto:[email protected]">[email protected]</a>. Thank you, Regards marie
try removing the front wheel by pressing the two black dots either side of the tubular frame and sliding the wheel out. then slide the metal end of the basket up the groove under the front tubing.the two velcro straps fasten to each end of the back axle. (the basket should have the quinny symbol on the underside)