It was difficult enough to find a repair facility, but when I did they told me repairs could easily top $200 so I just bought a new printer. I found a factory refurbished (looks new to me!) HP C7280 at OfficeMax for $149.95 with full factory warranty.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Yes you will need a memory card because the memory on the HP is full. You can delete all the memory in the Hp but need to buy a program to do so. So in the long run it is cheaper to get a memory card for it and it will work just fine for you. Have a great day.
Just go to
select your country,
select 'Download drivers and software '
type in your model, ie 'Photosmart 3310'
select the exact model from the results,
choose your OS,
Hi, The "Oxc18" series errors can be removed by resetting the printer. Unplug the USB cable from the printer, remove the ink cartridges. When the "Insert ink cartridges" message appears unplug the power cord from the printer. Wait 1 minute (at least), then reconnect the power cord and turn on the printer if it didn't come on by itself. Reinsert the ink, close the unit and print a calibration page if prompted to do so. Finally reconnect the USB cable to the printer. If this doesn't work, the unit needs service (or replacement if the service call will cost more than a new printer). Thank you!!
Could be the Power supply. You can remove it with one screw on the back where you plug it in. Slide it out and replace it. If you can Find parts. HP doesn't seem to like to help with part numbers. buggers only try to sell you a new printer.
Toi uninstallthe old driver,
1.) ensure your printer is connected to the computer and its powered on
2.) click start, right click mycomputer, click properties
3.) click hardware tab, then click device manager
4.) click view then show hidden devices
5.) the printer will show up on the left in the tree view,
6.) right click it and click uninstall
7.) immidately unplug your printer
8.) restart and install new driver..
9.) when it ask your to plug your printer in then do so..
10.) sigh of relief
My HP 3310 wil not print black. The color prints fine. Spent 2 hours on the phone with HP support only to be told to buy a new printer. The machine is less than 2 years old. There must be a way to repair this. Any ideas? Barbara