INSTALLATION HEY I HAVE A ALL IN ONE PRINTER AND I NEED TO INSTALL IT TO MY COMPUTER BUT I DONT HAVE A DISK CAN U PLEASE HELP ME TO GET IT TO WORK ON MY COMPUTER ITS A HP PSC 2175 ALL-IN-ONE PRINTER. PLEASE HELP ME THANKS....... SIMON

Hello. Thanks for choosing Fixya! Click on your start button and then on printers and faxes. Look and see what other printer drivers you already have installed. Delete any that you no longer need and THEN install your new disc. Regards, Joe

Hey Hi!i!ii!i!i!i,

Firstly Insert The Printer's Driver Software Disk In The Computer And Completely Uninstall The Printer Driver Software. Don't Remove It From Control Panel.
YouMay Use Any Uninstaller Software For Removing the Printer's DriverSoftware And If You Don't Have The Printer's Driver Software Disk.Here'sThe Link For Uninstaller Software. ( It Will Work Only With WINDOWSOPERATING SYSTEM)

http://wugnet.com/shareware/spow.asp?ID=638

Then Clear The Temp And Prefetch Files.

Disconnect the printer's cable form the back of the computer and disconnect printer's power cable and turn it off.
Press and hold the printer's power button for 30 Seconds then release it.

Turn off your computer and then disconnect all the cables from the back of the computer.
Press and hold the computer's power button for 30 Seconds then release it.

Wait 2 minutes.

Hook up monitor, mouse, keyboard, internet connection and power cable and then restart your computer.

Hook up printer's power cable and then turn it on.
Hook up printer to the computer.

Copy and paste the link below in your internet browser and then download and install the LATEST PRINTER'S DRIVER SOFTWARE AND FIRMWARE AVAILABLE, IF ANY..

WINDOWS XP
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=11731#DownloadDetailAct

WINDOWS VISTA
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=11731#DownloadDetailAct

FOR ANY OTHER OPERATING SYSTEM KINDLY CHOOSE THE OPERATING SYSTEM.
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=11731#DownloadDetailAct

Restart Your System.
Issue Resolved.

Feel Free If u need any further help.....Kindly Rate Solution..

Hey,

you can download the drivers / software for your psc printer from
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=90763


Let me know if you need anything else.

Thanks and good luck.
Ekse

You can download the software here:

http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1128296&lc=en&cc=us&dlc=en&lang=en&cc=us&submit=Go%20%BB

Go to the HP website. Click on the upport link. Lookup your specific printer model # and operating system you are using. Download the appropriate files and install. You should be all set. Hope this helps & please take a moment to rate this solution. Thanks.

Hey,

you can get the driver from this page
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=238&modelid=10442

select drivers and downloads, select the windows version the computer has.

Then you will need to burn the files into a cd or move them on to a memory stick so you can take them to the computer that doesn't have internet.

Let me know if you need anything else.


Thanks,
Ekse

If you have Vista then there's no HP software available. But the drivers are already built in so its plug and play.

Software for xp you can download here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&lang=en&docname=c00909927&rule=13140&product=90809&

You need to download the drivers.

If you just need the operating software and drivers, go to www.hp.com then search for your printer. You should be able to download all the software you need from that site to operate your printer.

Can Not Install my Z640 Printer