Can I pair my plantronics 320 with more than one phone? I have personal phone and a work phone. Thanks

Once you make your cell phone discoverable, put the Plantronics Explorer 320 headset into pairing mode by holding the call control button until the headset flashes red and blue. Here is the link for the Explorer 320 User's Guide with the pairing instructions.

Good luck from Headsets Direct!

I would suggest turning off your phone and headset. Turn your phone back on and put the headset into pairing mode (the headset needs to be turned off when starting the pairing mode) pull up your menu on your Bluetooth phone and try reconnecting the two again.

Below is the Explorer 320 User's Guide for more information.

Plantronics Explorer 320 User's Guide

Good luck from Headsets Direct!

Remember that newer phones are like small computers, so they may become corrupt over time and you may need to reset them every so often. Simply turn your phone off and remove
again the battery for a few seconds, then replace the battery and turn it back on again. If this does not resolve the issue, delete any pairing information for your Explorer 320 headset and pair it again with your phone, carefully following the instructions on the link below for the Plantronics Explorer 320.

Plantronics Explorer 320 User's Guide

Good luck from Headsets Direct!

Begin with Headset turned off. Press button for 6 sec. Release button when Light Indicator flashes blue and red. Headset is ready to pair with Bluetooth device. Use your device?s menu to enter pairing mode and select ?320 Plantronics? on the display. When asked for passkey, enter ?0000.?

turn on blue tooth on mobile first..then press and hold the power button on plantronics untill the light flashes red and blue alternatively...then search for bluetooth from mobile and pair and if asking a code enetr 0000..

it's either OOOO or 0000.

I have a 300 series Plantronics and it only functions if I unpair and repair with the I phone each time I want it to work. The AT & T technician tells me that the one I have has old software in it and that is all it will ever do. It also does not "beep" in the ear when it connects like it did when I had it paired to my Motorola L7. That makes it hard to know if it is connected even though the I phone says it is paired with the Plantronics ear piece even if the ear piece is turned off.

Here is a link to an Explorer 320 User's Guide, that will help you with your connecting to the phone. The instructions for pairing would be the same for the 320.

Plantronics Explorer 320 User's Guide

Good luck from Headsets Direct!

http://www.plantronics.com/north_america/en_US/products/cat1150057/cat1150057/prod5560012?prodfind=true&mftr=MOTOROLA Go to this website, and scroll down to Interactive Bluetooth Pairing Guide. (Plantronics 330 - V555 doesn't show 320 and instructions will be similiar). Click on Interactive Bluetooth Pairing Guide and a tutorial will walk you through the steps. Have headset and phone together when you do this and both must be charged. Hope this was helpful. Pam

0000 should be keypass