Printer will not turn on. all conections checked
Fiend your solution direct from hp. Here is your solution...
http://www.hp.com/printer/prob676ijt65/solution
731
Unplug the power cord from the All-In-One and also from the wall outlet.
Leave it unplugged for at least 1Mins time.
Now connect the power cord directly to a wall outlet without thesurg protector (You can also try switching to different outlet but without the surg protector)
And before connecting the power cord to the All-In-One press and hold the # and No 6 keys and then insert the power cord back to the All-In-One and do not release the keys in a minute it should come up with a message, if not then release the keys and then try turning the power button.
If it still does not turn on then in the cable you should have a rectangle box like thing check and see if you feel any heat in the same.
If not you may have to check with changing the power cord and the power adaptor.
Good Luck
323 views
Usually answered in minutes!
I have this same problem. I have been using it for a while then yesterday it just suddenly would not turn on. I have checked all connections, unplugged it for a little while, then tried again and I am still not getting anything. It doesn't seem to be broken, just won't come on!!
i cant make my printer online.. i have tried all connections.
×