Question about Computers & Internet

1 Answer

Product 966, D-Link D524 Router.

I did as you suggested,went to DLINK and upgraded my firmware. It didn't change a thing. After I downloaded the firmware I went to IE and entered the IP address of the Router. What came up was another page of Google sites to solve my problem. What now?

Posted by psher522 on

Ad

1 Answer

Matson Kurian

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 175 Answers

It happens when you type wrong ip address and it automatically goes to google because google is the default search engine setted in your computer and the Ip address entered is wrong so it search for it and end up with some google search information

I hope you are not sure about your router Ip address - if you know how to find out the real ip address of the dlink router do it
and go to command prompt ping that ip address for reply.

Clarify me about your network structure - mostly default Ip address when you get it new is 192.168.1.1 - Try to reconfigure it

Are you able to get a log page from the router

Posted on Aug 13, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

D-Link DI-514 Router Firmware Upgrade Error Message


This is an old post, but just in case someone else needs this...

The dlink website for the Di 514 rev B version actually links to the rev C versions' firmware. I got the same error.

browse to here ftp://ftp.dlink.com/Gateway and grab the right version for your rev B device.

Best,

Kevin

Oct 04, 2012 | D-Link Dlink DI-514 Air Wireless 2.4 GHz...

1 Answer

I need to configure my router dl-524M but when i login, everything is i chinese. How can i can change it to english


moz-screenshot.pngYou will have to change the Chinese firmware to English.Check out this link: http://www.dlink.com.au/tech/Download/download.aspx?product=DI-524&revision=REV_B&filetype=Firmware

Download the firmware onto your computer.
The file you downloaded should be a zip file with a .bin file(which is the firmware) and an executable file inside it.

Run the exe file to perform the upgrade. If something goes wrong you can try to do this manually by following the steps below.

1. Goto 192.168.0.1 on your browser and enter your ????? username (admin) and your ?? password (leave the field blank). Click ?? OK to enter the web configuration for the device.

2. Click on the ?? Tools tab and then the ???? Firmware button on the left side. Click on the ?? Browse button and browse to the .bin (or .dlf) file you downloaded in web site. Highlight the file by clicking on it once and click ?? Open.

3. Click ?? Apply (should be a green check button) It may take a up to 30 seconds for the upgrade to complete. Click on the ?? Continue button. The firmware is now upgraded.

If you have someone who can read chinese ask them for help or else here's a screenshot:
sjoe777_0.png

4. That should do it. Your router might reset after that. Try going to 192.168.0.1 after that and check if the firmware has changed.

Dec 08, 2010 | Computers & Internet

3 Answers

WBR-1310. No admin logon, only f/w upgrade page


Download firmware from site
http://www.dlink.com/products/?tab=1&pid=WBR-1310&rev=WBR-1310

DLink states the login issue has been fixed with firmware v1.04 3/28/07

Remember to get the right one for your unit model. You must connect a RJ45 cable to the router and computer you have downloaded the firmware to and remember which directory it's in. When it asks for the firmware put in the target location (c:\my documents\xxxxx) of the firmware file. Good luck.

Jul 02, 2009 | D-Link 802.11g Wireless Router WBR-1310...

1 Answer

DI-624M has "limited connecyion" perhaps due to damage to its firmware 10/20/07


Hi,
          You need to upgrade the Dlink firmware,, that will do it.

Oct 21, 2007 | D-Link DI-624M Router (DI624MRE)

1 Answer

How do I upgrade the firmware on my VDI-604 or VDI-624?


Step 1 Download the latest firmware. Click here to download the latest firmware for the VDI-604 - http://support.dlink.com/products/view.asp?productid=VDI-604#firm Click here to download the latest firmware for the VDI-624 - http://support.dlink.com/products/view.asp?productid=VDI-624#firm Step 2 Open a web browser and type the IP address of the VDI-604 or VDI-624 in the address bar (default is 192.168.0.1). Press Enter. Step 3 The default username and password is listed below for your version of firmware: VDI-604 firmware 1.05F/VDI-624 firmware 2.39DDM - The default username is admin and the default password is blank (nothing). VDI-604 firmware 1.07 Build 28/VDI-624 firmware 2.43 Build 12 - The default username is admin and the default password is password. Click OK. Step 4 Click on the Tools tab at the top and then click Firmware on the left side. Step 5 Click Browse and navigate to the .bin file you downloaded in Step 1. Select the file and then click Open. Step 6 Click Apply. It may take a up to 30 seconds for the firmware upgrade to complete. Step 7 When prompted click Continue. The firmware upgrade is now completed. Step 8 If you get a Page cannot be displayed or similar error after clicking Continue, close the web browser and re-open it. Repeat Step 2 to login to the web-based configuration.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

4 Answers

How do I upgrade the firmware on my VDI-604 or VDI-624?


Step 1 Download the latest firmware. Click here to download the latest firmware for the VDI-604 - http://support.dlink.com/products/view.asp?productid=VDI-604#firm Click here to download the latest firmware for the VDI-624 - http://support.dlink.com/products/view.asp?productid=VDI-624#firm Step 2 Open a web browser and type the IP address of the VDI-604 or VDI-624 in the address bar (default is 192.168.0.1). Press Enter. Step 3 The default username and password is listed below for your version of firmware: VDI-604 firmware 1.05F/VDI-624 firmware 2.39DDM - The default username is admin and the default password is blank (nothing). VDI-604 firmware 1.07 Build 28/VDI-624 firmware 2.43 Build 12 - The default username is admin and the default password is password. Click OK. Step 4 Click on the Tools tab at the top and then click Firmware on the left side. Step 5 Click Browse and navigate to the .bin file you downloaded in Step 1. Select the file and then click Open. Step 6 Click Apply. It may take a up to 30 seconds for the firmware upgrade to complete. Step 7 When prompted click Continue. The firmware upgrade is now completed. Step 8 If you get a Page cannot be displayed or similar error after clicking Continue, close the web browser and re-open it. Repeat Step 2 to login to the web-based configuration.

Feb 16, 2006 | D-Link AirPlus Xtreme Super-G DI-624...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...