- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most TVs have manual buttons somewhere on the set to control volume up and down, channels up and down, and usually a menu button to access the settings. I'm not familiar with Insignia TVs but do a google search for your brand and model. If you don't have your original manual you should be able to find one online that shows where the manual control buttons are located and how to change the settings manually without a remote.
Perform a master reset by doing the following: Turn the TV On With the original Sony remote, hold down the "up" button in the 4 direction buttons (uo, down, left, right) While holding down the up button on the remote, press the power button on the TV (not the one on the remote) The TV should reset and restart, asking you which language you wish to use. After choosing the language, let the TV do an auto program and you should be OK Please rate this solution. Thanks!
Orion Codes: 035, 121, 135, 191, 394
Programming a GE Universal Remote Control takes about seven steps.
Step One: Manually turn on the device you wish to program.
Step Two: Press the Code Search button on the remote until the indicator light turns on.
Step Three: Release the Code Search button.
Step Four: Press and release the button for the device you are programming.
Step Five: Enter the three-digit code for the device using the number buttons on the remote. After the code is entered, the indicator light turns off.
Step Six: Aim the remote at the device and press the power button. The device should turn off.
Step Seven: Press Channel Up on the remote with the device on. If the device responds, no further programming is required.
To look up a device code to enter directly into the remote, you can visit the GE Remote Code Locator Website.
Hope this helps, Good Luck :)