Question about EliteGroup nForce3-A Motherboard

1 Answer

Where are the EliteGroup nForce3-A power & reset plug-ins located at?

I can't find anywhere on this motherboard where the power switch, reset switch, HD led & the power led jumpers are located on this board. I see some unmarked pins behind the sound jacks just to the left of them, but the board is unmarked there so I'm not willing to try plugging in power & reset plug-ins just yet. Any help would be appreciated.

Posted by Anonymous on

Ad

1 Answer

Mike Peluso

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Goto page 10 in your user manual. There look for. Connect the case switches and indicator LEDs to the SW1. (Location).
There is mother board layout decription for how to connect the case, 2-pin wires case connectors ( Page 12 shows pin numbers & which is plus + & negative - pins.). You'll nee the manual to help you. Download it from ECS at: http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=579&DetailName=Manual&MenuID=48&LanID=0

Good luck!

Mike

Posted on Aug 14, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need jumper settings for the power button


this will help u...

http://www.mxdatarecovery.net/pics/ms-7525-msi-motherboard-front-panel-power-switch-hd-led-connectors.gif


http://rays-place.net/Extras/PCTechGuide/tutorials/images/MBoard/P2-Power.jpg

Nov 24, 2012 | Computers & Internet

1 Answer

How do i wire-up the: ( eg. power l.e.d., HD led, reset led ect. to the board


The various wires from the case front panel should be labeled to indicate power LED, HD LED, etc.
The motherboard front panel jumper pins should be grouped together and the pins should be labeled to indicate PWR, HD. RST etc.
You can go to the motherboard manufacture's WEB site to download a diagram of your model motherboard and it will show all the locations of the connecting pins.

Jan 30, 2011 | Chaintech MP4M266A Motherboard

1 Answer

LITTLE BLACK AND WHITE CABLE HAS BEEN MOVED. IT RUNS FROM THE ON/OFF SWITCH TO THE M/BOARD BUT I KNOW NOT WHERE. cAN YOU HELP PLEASE


Look for jumper labeled JFP1. On this jumper are the following pinouts:

Pins 1&3 = Hard disk drive LED
Pins 2&4 = Power Indicator LED
Pins 6&8 = Power on/off switch
Pins 5&7 = Reset switch

Jan 08, 2010 | MSI P4M900M-L (7255-060(P4M900M-L))...

1 Answer

How to connect the front panel sould device?


Do you mean speaker or front panel audio? The front panel audio connector is located at the rear of the board, behind the PCI connectors - the speaker connections are in the panel connector block (2x10 pin header) located at the front left of the board.

With the board in it's normal position, the speaker pins are on the right hand side of that block, on the pin nearest the front and the one 3 positions behind that

<back of board>
|
|
| HD LED + | | Power LED +
| HD LED - | |
| | | Power LED -
| | |
| | |
| Power SW | |
| Power SW | | Speaker
| | |
| Reset SW | |
| Reset SW | | Speaker
|
------------------------------------------------------
Front of board

Jul 03, 2009 | ASUS K8V-MX Motherboard

2 Answers

Can't Fix FRONT PANEL HEADER on my Motherboard


Hi,

Here is a link to your motherboard manual:

D845PEBT2 Manual

Go to Page 33 for the Front Panel connections...with pictures. :-)

Thanks for using Fixya.

Jun 12, 2009 | Intel Desktop Board D845PEBT2 Motherboard

1 Answer

Motherboard not starting!


try to set the jumper setting of the cmos battery in *********** board.you set the jumper setting 1 and 2 with in 3 mins.then try to set back the original setting the jumper seting in 2 and 3.

[email protected]

Jan 11, 2009 | ASUS K8V-MX Motherboard

1 Answer

Power Switch


there is a small writen name embeded on every board,
rst=reset
pwr=pow

Oct 08, 2008 | Intel Motherboard

2 Answers

Kt6v jumper settings


c2813d2.jpg
Some wiring can be confusing such as with the board we were using. As you can see the wires mainly connect from left to right but the hard drive LED and the Key Lock wires connect from top to bottom but still show where the (-) connection is. This is where you need to pay close attention to where things actually connect to the motherboard as many boards have similar configurations.

May 23, 2008 | Abit : KV7 Socket A KT600 Motherboard

5 Answers

Compaq for Evo D300 Motherboard


The manual can be found here. There is a numbered diagram inside. http://www.eserviceinfo.com/downloadsm/5105/Compaq_Evo%20300-500.html Hack

Jul 09, 2007 | Compaq (281946-001) for Evo D300...

Not finding what you are looking for?
EliteGroup nForce3-A Motherboard Logo

Related Topics:

469 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Ekse

Level 3 Expert

13434 Answers

Tareq Bin Mostaq...
Tareq Bin Mostaq...

Level 3 Expert

1449 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...