Print labels i am having trouble printing labels. i keep getting message "set bypass paper" what do i do???

The official HP website page for trouble shooting the printers HP OfficeJet Pro X series - Resolve paper jams including "Print Zone" jams ' HP® Customer Support

Hello Laura,
Here is the pdf that explains how to set up th bypass tray; http://support.appstate.edu/sites/support.appstate.edu/files/MX3110%20USE%20SPECIAL%20PAPER%20IN%20THE%20BYPASS.pdf

The text of it is as follows;

TO USE SPECIAL PAPER IN THE BYPASS
? Press either the picture of the copier or press
paper select
? Load paper in the bypass
? Make sure the correct size shows up under
bypass tray
? If paper is not just plain paper press type and
size
? Choose paper type
? If you are printing to the bypass from your
computer you must also tell the print driver
under the paper tab what type of paper is in
the bypass if its not just plain paper
? The copier and the PC must match paper
types
? Press the X button to Accept

Good Luck!
Rich Lilja

Hi, wich kind of error message?
Is it " check paper size" or " paper jam" or ...
Does the paper goes all the way trough copier or jams at bypass, at drum or fixing section,...
Did you "tell" over pc drivers that you are want to print on labels, that the lables are eg. A4, that pick up paper from bypass,...
It could also be a problem in pick up clutch and solenoid, or it just needs to clean the bypass pickup roller,...

Send more info

Look in the user manual witch formats does bypass supports, and then set the approp. size and type of paper

there are two places to set the paper tray on the ricoh aficio 2035 print drivers first make sure you are using the PCL 5 drivers not pcl6 or rpcs then go to the printers folder and set the defaults by right clicking the printer and selecting properties printing preferences, then go into word and select print set up and properties then defaults for printer select bypass tray and select labels enter the correct sheet size for the labels from the drop down box click apply and you should be set.
if this resolves your issue please rate my anser accordingly

regards

there are paper guides on either side of the paper in the bypass... make sure thy are nice and snug right next to the paper...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Labels should only be printed through the bypass tray. when printing, go to "properties", "Paper" and change tray from "auto select" to "Bypass tray"

1-did you change to bypass instead of trays in the menu?
2-the sensor (black lever in the bypass that triggers the sensor) is missing or bad

When you say TOP TRAY, do you mean a paper drawer, or the BYPASS TRAY? If the labels won't feed into the bypass but bond paper does, check to see if your labels are made for inkjet printers. Go to www.avery.com and contact Avery customer support to see what product they recommend for your MFC. Labels made for plain paper printers sometimes do not work for inkjets, and vice-a-versa.

Solution Title: How to print on COM10 envelops from the Bypass tray (PCL6) using a Windows 2000 O/S Resolution/
Solution Fixed! Did not fix. Resolution Role: Fix
Critical Message: The Envelope must be placed in the Bypass Tray face down (flap side up) and Long Edge IN. In Microsoft Word (Word 2000)

1. Under the Tools tab, select Envelopes and Labels.
2. Enter your Delivery and Return addresses.
3. Click on Options
4. Under Envelope Options; [Envelope size], select Size 10 (41/8 x 91/2 in)
5. Under Printing Options, select Portrait (LEF) - Long Edge Feed
   • As Feed from, select Tray 5 (Bypass)
6. Click <OK>

Within the WorkCentre Pro 123/128 print driver
After opening up the print driver [<Start>, <Settings>, <Printers>, double-click on the WCP 128 PCL6 driver], click on Printing Preferences under the General tab.

• Under the Paper/Output tab

Set the following features as follow:

• Job Type: Normal Print
• Paper Size: COM10
• Output Size: Same as Paper Size
• Image orientation: Portrait
• Image Rotation: OFF
• 2 sided Print: 1 sided Print
• Stapling: None
• Output destination: Center Output Tray
• Offset Stacking: None

• Under Tray/Layout

• Set Paper Source to Tray 5 (Bypass)
• Click on Bypass Tray Settings
  • Paper Type: Heavyweight (1 or 2)
  • Feed orientation: Portrait
• Click <OK>
• " on Specify Paper Type and select Heavyweight (1 or 2)
• " (Apply> and <OK>
• " <OK> again

In Microsoft Word under Envelopes and Labels, Click <Print> to send the information to the printer.

Note: This setup represents one way of printing envelopes. Other ways setting up some features in a different manner will work as well.

Solution v1.3.20.0 312637.How to Print on COM10 Envelops From the Bypass Tray (PCL6) 2006-04-05 21:57:29