I I don't know if you can help me. I have a PanSat 2700a and need to program it. I have the files on my computer and it takes a null modem cable. a cable that had a 9 pin connector on one end and a USB on the other. i been tryin to get the usb to read but all i get is new hardware found wizard .I,ve been trying to solve this problem for a while and with my limited Knowledge of computers I don't know what to do,if you could help me it would be greatly appreciated. Thank You
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
press "MENU" on remote, then press button directly below the "OK" button on remote 3 times to highlight "USER SETUP", then press the "OK" button on remote, then press the button directly under "OK" button 2 times on remote to highlight "TV TYPE" , then press left or right button directly beside "OK" button on remote to change it to "NTSC" .
If you loaded a new program, make sure you check your DiSeqc switch settings if you are using one. Also make sure your dish is align properly. Try to do a blind scan to see if you pick up anything that is available from the satellite.
If nothing works, I would suggest to check C13 and C14 for bulging conditions, if they are defective; you will need to change them.