Question about Audio Players & Recorders

3500 phillips home theater system

Hi I have phillips 3500 home thearther system and the power light keeps on blinking and nothing else when work on it what can I do I already did the unpluging it

Anonymous May 11, 2010

possibly power supply problem is the flashing very quick if so see if you can hear it ticking this will be quiet, if it ticks then it is tripping you need to have the item fixed,

depending where you are you can send it to me I have a workshop for repairs

post back

regards

Brian

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.
Expert
56 Answers

It is possibly a power supply failure have you noticed a ticking noise you will have to be close to hear this if it ticks your power supply is tripping and needs rectification, if in uk do have workshop for repairs if you pay carridge will evaluate and repair

post reply and will be in touch

Regards

Brian

Posted on Aug 21, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

The red light keeps blinking and the receiver will not power on.

The light indicates a shorted component.

May 16, 2016 | RCA Rtb1016 300w Blu-ray Home Theater...

2 Answers

No power when i turn on. The standby light flashes once and nothing else happens. No display or functionality at all

Seem like you need a battery

Jan 02, 2014 | Sony DAV-SC8 System

1 Answer

Hi my remote control doesn`t work, we just change the battery and it did not change. all our system is going thru this remote and now nothing works. remote model rcvit-27

First open your mobile phone camera and point to the LED on the top of your remote and when you press any key if the remote power works you can see a blink light on your phone screen if not check the power of your remote good luck

Sep 05, 2011 | Bose Lifestyle 20 System

1 Answer

My PHILLIPS HTS3410D home theater system seems dead wont power on nor the standby light turn on either. what could this be. i checked fuse and all capacitors seem ok.

Hi,
Click HERE to download required service manual copy, let me know after downloading file.
Thanks.

Jan 05, 2011 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

I have a HTS3410D Home Theater system. I cannot

a blinking or pulsing power light usualy means a problem with the power supply. Check for burned resistors or swallen capacitors on the power board it will be the one with the one with the main power running to it.

Nov 17, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

My soundbar (Phillips hts8100) freezes on low pwr standby.

hi
i have also same problem, by that time i am pressing tv/ disc button then it should be okay

Oct 11, 2009 | Philips SoundBar DVD Home Theater with...

2 Answers

Jvc th-c50 home theater standby light blinks but won't turn on

you need to have service manual copy to check amplifier output section as it seems defective. There are few websites that offers service manuals download for small fee.

Jun 11, 2009 | JVC TH-C50 System

1 Answer

My Phillips subwoofer is not working/no replacement available.

Hi,
Yes it can be repaired.

Jan 07, 2009 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

STANDBY LIGHT KEEPS BLINKING

Unplug the power cord, wait for 5 minutes, plug the power cord back in and try to operate the unit.

If this does not work, you will have to get a technician to look at it for you.

Please rate this solution - THANKS

Dec 26, 2008 | Philips HTS3410D/37 700W DVD Home Theater...

1 Answer

Swa3000

With the home theater system off, press and hold the REMAIN button on the home theater's remote control for 5 seconds.
Note: You can release the REMAIN button when the POWER LED blinks blue/Red depending on model.
With the SWA-3000 turned on, use a ball point pen to press the RESET button on the back of the SWA-3000. The POWER LED in the front of the home theater blinks two times.