Question about Home

1 Answer

Needs new hexagonal toilet seat bolts - Home

Posted by pastordavidn on

Ad

1 Answer

Paul Beyer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 528 Answers

Fill the suction line all the way to the foot valve making sure to get all the air out of the line and that sould do it for you.

Posted on May 04, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i fix a soft closing toilet seat


some of these have bolts under seat...you turn seat to left or right by grabbing while in closed position...this will release the seat from the holding bolts...then tighten the bolts....then reset the seat on bolts then lock down by doing the opposite as you took off...

Oct 10, 2014 | Home

1 Answer

Kohler Toilet seat bolts stuck


If the bolts are plastic or metal you will need to cut them off and install new ones from new seat or bolt kit there is no easy trick its just an easy cut them off or you could try some wd-40 or nutbuster.

Apr 12, 2014 | Kohler K-3384-2 San Raphael Elongated...

1 Answer

Self closing all in one tolet seat boxed, hidden screws, how to tighten


If you are trying to install a standard toilet seat on a special "smooth sides" toilet, it likely will not work. Most hidden bolt toilets come with a special seat because you cannot get to anything from below. This special seat has a set of expanding style bolts that are attached to the screw that is part of the seat. The plastic expanding bolt goes into the hole(s) on the toilet, and as you tighten the screw on the toilet seat bolts, they expand the plastic part in the hole of the ceramic toilet.

Aug 29, 2013 | Kohler 3386-6 Rialto Skylight Round Front...

1 Answer

I have a toilet which is a one peice. The toilet seat has come loose and the bolts have dropped to the floor. I can not fit the seat back as the pieces that i would use to tighten the seat are on the floor...


In no case would you ever have to pull a toilet to get to seat bolts.My guess is if you take the tank lid off and look inside there youll see the bolts . If not you can buy another toilet seat with new bolts or just get the bolts to fit your seat and tighten it down.Forget about the old bolts unless they become a problem with the flushing of the toilet. Hope this helps

Jun 22, 2010 | Home

2 Answers

Missing bolt for toilet seat


A standard toilet seat bolt should be fine. There are some with a rubber boot that expands as tightened but you should be able to reach the nut by reaching into the tank and under the lip. The new nut & bolt should be plastic so they won't corrode.

Apr 19, 2010 | Eljer Toilet Onepiece Canterbury ...

2 Answers

Toilet seat


Here's what I did. Unscrew them as much as possible. Then I used a bolt cutter and hacksaw to cut away as much of the plastic seat holders as possible. I could then remove most of the seat, and get better access to the screws. I then raised the loose screws enough to cut them with a bolt cutter. Soft screws cut easily. The screw heads are now out. Now, tap down on the screw/anchor and it falls into the bowl. It will stay there. The remaining problem is that you need anchors to secure the new toilet seat. Kohler wants $50. I have a usable but loose seat. Never again-Kohler.
I strongly recommend using a boltcutter. A hacksaw will tear up the bowl.

Nov 25, 2009 | Kohler 3386-6 Rialto Skylight Round Front...

1 Answer

I have a kohler toilet that needed a new seat.


Now isn't that a trick. Epoxy! The bolts,now studs, must be quite short. Well, glad you got it resolveve. I hope your house has more than one restroom..That epoxy will need a day or two toset up properly. :) Thank you for the reply. We all learn from each other.

Nov 14, 2009 | Kohler 3386-6 Rialto Skylight Round Front...

1 Answer

What is the best way to remove stuck toilet anchors


try rotating the entire toilet counter clockwise so the bolts are in the insert slot of the toilet flange and rotate the nut and the bolt head should line up and pop free of flange.

Oct 30, 2009 | Kohler K-3384-2 San Raphael Elongated...

2 Answers

Hello - my toto toilet seat broke where the bolt holds the seat to the toilet


well you can go to home depot and get your self new seat with bolt or you can buy the screws for it

Aug 10, 2009 | Toto Lloyd 1pc. E/F Toilet w/Maple Seat ...

2 Answers

Broken bolt on toilet seat


your new seat will have bolts and nuts with it.

Jan 11, 2009 | Kohler - Toilet - One-piece - Santa Rosa -...

Not finding what you are looking for?
Home Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Experts

john h

Level 3 Expert

23515 Answers

Tom Chichester

Level 3 Expert

61177 Answers

Brad Brown

Level 3 Expert

18564 Answers

Are you a Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...