No picture I have a Toshiba plasma tv model 42HP66. While watching it the picture went out, I can hear the audio and there is a faint "ghost" picture. Please help Matt

One of your y driver almost go bad. For your future problem please visit my site athttp://billy-tech.blogspot.com/

try replaced z board Manufacturer Toshiba Part Number 75003032 Description ZSUS PCB ASSY

Hello, You most likely have a bad Y sustain board! Part #'s are:

6871QYH053A, 6871QYH053B, 6870QYH005B, 6871QYH953A, 6870QYH105B.

Here is a link to the part you need!

http://www.discount-merchant.com/Y-SUSTAIN-PN-6871QYH053A-6871QYH053B-6870QYH005B-p/vizio-sku9506.htm

I hope this help you! Please feel free to give me a call or message me if you have any questions! Ask for Dave!

Thank you! :-)

Dave
1-503-432-9904
[email protected]

Hello, You may have a bad power supply! Its hard to say! I need more info! please feel free to call or message me if you would like more help with your TV!

Thank you!

Dave
1-503-432-9904
[email protected]

I too have this problem with no help from hh Gregg, where I bought the tv, and no help from Toshiba. I resorted to calling the BBB and complaining about the defective workmanship. I took the tv, which is less than 2 years old, apart and found the y-sus board, behind the y-sus board is a foam rubber spacer to seperate the circut board from the backside of the screen. I think this pad is designed to prevent heat buildup in the y-sus board. The pad itself is held on by glue and that glue melted causing the y-sus board to short out. I noticed this after finding a tacky substance behind the board. The heat from the plasma screen melted this and also the pad itself. Toshiba claims no resposibility because the tv was out of warranty. Thanks Toshiba.

Hello, You most likely have a bad Y sustain board! Part #'s are:

6871QYH053A, 6871QYH053B, 6870QYH005B, 6871QYH953A, 6870QYH105B.

Here is a link to the part you need!

http://www.discount-merchant.com/Y-SUSTAIN-PN-6871QYH053A-6871QYH053B-6870QYH005B-p/vizio-sku9506.htm

I hope this help you! Please feel free to give me a call or message me if you have any questions! Ask for Dave!

Thank you! :-)

Dave
1-503-432-9904
[email protected]

Your Cable box might need to be reprogrammed. Call the cable company and they will drive you thru the steps to program it, this way you will get the channels. This process might take you 30-45 minutes.
Artgirlny

I have a 50 plasma Toshiba and since this morning it turns on and off every 20 seconds by itself. The control is not working either. When it's on it nakes a static sounds and then just shuts off. If anyone can lep me please do so.

I could be wrong but sounds like your plasma display is going bad. What is your model number?

power supply is miss fireing.